# Get started with Ash Authentication
If you haven't already, read [the getting started guide for
Ash](https://ash-hq.org/docs/guides/ash/latest/tutorials/get-started.md). This
assumes that you already have resources set up, and only gives you the steps to
add authentication to your resources and APIs.
<!-- tabs-open -->
### Using Igniter (recommended)
#### Install the extension
```sh
mix igniter.install ash_authentication
```
##### Using Phoenix?
Use the following. If you have not yet run the above command, this will prompt you to do so,
so you can run both or only this one.
```sh
mix igniter.install ash_authentication_phoenix
```
There is not a task(yet) for configuring the strategies and add-ons that you use.
So continue on below and select your strategies/add-ons and set them up manually.
### Manual
#### Add to your application's dependencies
Bring in the `ash_authentication` dependency:
```elixir
# mix.exs
defp deps()
[
# ...
{:ash_authentication, "~> 4.0"}
]
end
```
And add `ash_authentication` to your `.formatter.exs`:
```elixir
# .formatter.exs
[
import_deps: [..., :ash_authentication]
]
```
#### Create authentication domain and resources
Let's create an `Accounts` domain in our application which provides a `User`
resource and a `Token` resource. This tutorial is assuming that you are using `AshPostgres`.
First, let's define our domain:
```elixir
# lib/my_app/accounts.ex
defmodule MyApp.Accounts do
use Ash.Domain
resources do
resource MyApp.Accounts.User
resource MyApp.Accounts.Token
end
end
```
Be sure to add it to the `ash_domains` config in your `config.exs`
```elixir
# in config/config.exs
config :my_app, ash_domains: [..., MyApp.Accounts]
```
Next, let's define our `Token` resource. This resource is needed
if token generation is enabled for any resources in your application. Most of
the contents are auto-generated, so we just need to provide the data layer
configuration and the API to use.
But before we do, we need to install a postgres extension.
```elixir
# lib/my_app/repo.ex
defmodule MyApp.Repo do
use AshPostgres.Repo, otp_app: :my_app
def installed_extensions do
["ash-functions", "citext"]
end
end
```
#### Setup Token Resource
```elixir
# lib/my_app/accounts/token.ex
defmodule MyApp.Accounts.Token do
use Ash.Resource,
data_layer: AshPostgres.DataLayer,
extensions: [AshAuthentication.TokenResource],
# If using policies, enable the policy authorizer:
authorizers: [Ash.Policy.Authorizer],
domain: MyApp.Accounts
postgres do
table "tokens"
repo MyApp.Repo
end
policies do
bypass AshAuthentication.Checks.AshAuthenticationInteraction do
authorize_if always()
end
end
end
```
#### Supervisor
AshAuthentication includes a supervisor which you should add to your
application's supervisor tree. This is used to run any periodic jobs related to
your authenticated resources (removing expired tokens, for example).
##### Example
```elixir
defmodule MyApp.Application do
use Application
def start(_type, _args) do
children = [
# ...
# add this line -->
{AshAuthentication.Supervisor, otp_app: :my_app}
# <-- add this line
]
# ...
end
end
```
Lastly let's define our `User` resource. Note that we aren't defining any authentication strategies here.
This setup is used for all strategies. Once you have done this, you can follow one of the strategy specific
guides at the bottom of this page.
```elixir
# lib/my_app/accounts/user.ex
defmodule MyApp.Accounts.User do
use Ash.Resource,
data_layer: AshPostgres.DataLayer,
extensions: [AshAuthentication],
authorizers: [Ash.Policy.Authorizer],
domain: MyApp.Accounts
attributes do
uuid_primary_key :id
end
authentication do
tokens do
enabled? true
token_resource MyApp.Accounts.Token
signing_secret fn _, _ ->
# This is a secret key used to sign tokens. See the note below on secrets management
Application.fetch_env(:my_app, :token_signing_secret)
end
end
end
postgres do
table "users"
repo MyApp.Repo
end
# You can customize this if you wish, but this is a safe default that
# only allows user data to be interacted with via AshAuthentication.
policies do
bypass AshAuthentication.Checks.AshAuthenticationInteraction do
authorize_if always()
end
policy always() do
forbid_if always()
end
end
end
```
> ### The signing secret must not be committed to source control {: .warning}
>
> Proper management of secrets is outside the scope of this tutorial, but is
> absolutely crucial to the security of your application.
<!-- tabs-close -->
#### Choose your strategies and add-ons
##### `mix ash_authentication.add_strategy`
A mix task is provided to add strategies and add-ons to your application.
For now, this only supports the `password` strategy, but more will be added in the future.
```sh
mix ash_authentication.add_strategy password
```
##### Strategies
- [Password](/documentation/tutorials/password.md)
- [Github](/documentation/tutorials/github.md)
- [Google](/documentation/tutorials/google.md)
- [Magic Links](/documentation/tutorials/magic-links.md)
- [Auth0](/documentation/tutorials/auth0.md)
- Open ID: `AshAuthentication.Strategy.Oidc`
- OAuth2: `AshAuthentication.Strategy.OAuth2`
##### Add-Ons
- [Confirmation](/documentation/tutorials/confirmation.md): confirming changes to user accounts (i.e via email)
- UserIdentity: `AshAuthentication.UserIdentity`: supporting multiple social sign on identities & refreshing tokens
#### Set up your phoenix or plug application
If you're using Phoenix, skip this section and go to
[Integrating Ash Authentication and Phoenix](https://ash-hq.org/docs/guides/ash_authentication_phoenix/latest/tutorials/getting-started-with-ash-authentication-phoenix)
In order for your users to be able to sign in, you will likely need to provide
an HTTP endpoint to submit credentials or OAuth requests to. Ash Authentication
provides `AshAuthentication.Plug` for this purposes. It provides a `use` macro
which handles routing of requests to the correct providers, and defines
callbacks for successful and unsuccessful outcomes.
Let's generate our plug:
```elixir
# lib/my_app/auth_plug.ex
defmodule MyApp.AuthPlug do
use AshAuthentication.Plug, otp_app: :my_app
def handle_success(conn, _activity, user, token) do
if is_api_request?(conn) do
conn
|> send_resp(200, Jason.encode!(%{
authentication: %{
success: true,
token: token
}
}))
else
conn
|> store_in_session(user)
|> send_resp(200, EEx.eval_string("""
<h2>Welcome back <%= @user.email %></h2>
""", user: user))
end
end
def handle_failure(conn, _activity, _reason) do
if is_api_request?(conn) do
conn
|> send_resp(401, Jason.encode!(%{
authentication: %{
success: false
}
}))
else
conn
|> send_resp(401, "<h2>Incorrect email or password</h2>")
end
end
defp is_api_request?(conn), do: "application/json" in get_req_header(conn, "accept")
end
```
Now that this is done, you can forward HTTP requests to it from your app's main
router using `forward "/auth", to: MyApp.AuthPlug` or similar.
Your generated auth plug module will also contain `load_from_session` and
`load_from_bearer` function plugs, which can be used to load users into assigns
based on the contents of the session store or `Authorization` header.
## Summary
In this guide we've learned how to install Ash Authentication, configure
resources and handle authentication HTTP requests.
You should now have an Ash application with working user authentication.
Up next, [Using with Phoenix](https://ash-hq.org/docs/guides/ash_authentication_phoenix/latest/tutorials/getting-started-with-ash-authentication-phoenix).
