lib/google_api/compute/v1/model/router_nat.ex

# Copyright 2019 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# NOTE: This file is auto generated by the elixir code generator program.
# Do not edit this file manually.

defmodule GoogleApi.Compute.V1.Model.RouterNat do
  @moduledoc """
  Represents a Nat resource. It enables the VMs within the specified subnetworks to access Internet without external IP addresses. It specifies a list of subnetworks (and the ranges within) that want to use NAT. Customers can also provide the external IPs that would be used for NAT. GCP would auto-allocate ephemeral IPs if no external IPs are provided.

  ## Attributes

  *   `drainNatIps` (*type:* `list(String.t)`, *default:* `nil`) - A list of URLs of the IP resources to be drained. These IPs must be valid static external IPs that have been assigned to the NAT. These IPs should be used for updating/patching a NAT only.
  *   `enableEndpointIndependentMapping` (*type:* `boolean()`, *default:* `nil`) - 
  *   `icmpIdleTimeoutSec` (*type:* `integer()`, *default:* `nil`) - Timeout (in seconds) for ICMP connections. Defaults to 30s if not set.
  *   `logConfig` (*type:* `GoogleApi.Compute.V1.Model.RouterNatLogConfig.t`, *default:* `nil`) - Configure logging on this NAT.
  *   `minPortsPerVm` (*type:* `integer()`, *default:* `nil`) - Minimum number of ports allocated to a VM from this NAT config. If not set, a default number of ports is allocated to a VM. This is rounded up to the nearest power of 2. For example, if the value of this field is 50, at least 64 ports are allocated to a VM.
  *   `name` (*type:* `String.t`, *default:* `nil`) - Unique name of this Nat service. The name must be 1-63 characters long and comply with RFC1035.
  *   `natIpAllocateOption` (*type:* `String.t`, *default:* `nil`) - Specify the NatIpAllocateOption, which can take one of the following values: - MANUAL_ONLY: Uses only Nat IP addresses provided by customers. When there are not enough specified Nat IPs, the Nat service fails for new VMs. - AUTO_ONLY: Nat IPs are allocated by Google Cloud Platform; customers can't specify any Nat IPs. When choosing AUTO_ONLY, then nat_ip should be empty. 
  *   `natIps` (*type:* `list(String.t)`, *default:* `nil`) - A list of URLs of the IP resources used for this Nat service. These IP addresses must be valid static external IP addresses assigned to the project.
  *   `sourceSubnetworkIpRangesToNat` (*type:* `String.t`, *default:* `nil`) - Specify the Nat option, which can take one of the following values: - ALL_SUBNETWORKS_ALL_IP_RANGES: All of the IP ranges in every Subnetwork are allowed to Nat. - ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES: All of the primary IP ranges in every Subnetwork are allowed to Nat. - LIST_OF_SUBNETWORKS: A list of Subnetworks are allowed to Nat (specified in the field subnetwork below) The default is SUBNETWORK_IP_RANGE_TO_NAT_OPTION_UNSPECIFIED. Note that if this field contains ALL_SUBNETWORKS_ALL_IP_RANGES or ALL_SUBNETWORKS_ALL_PRIMARY_IP_RANGES, then there should not be any other Router.Nat section in any Router for this network in this region.
  *   `subnetworks` (*type:* `list(GoogleApi.Compute.V1.Model.RouterNatSubnetworkToNat.t)`, *default:* `nil`) - A list of Subnetwork resources whose traffic should be translated by NAT Gateway. It is used only when LIST_OF_SUBNETWORKS is selected for the SubnetworkIpRangeToNatOption above.
  *   `tcpEstablishedIdleTimeoutSec` (*type:* `integer()`, *default:* `nil`) - Timeout (in seconds) for TCP established connections. Defaults to 1200s if not set.
  *   `tcpTransitoryIdleTimeoutSec` (*type:* `integer()`, *default:* `nil`) - Timeout (in seconds) for TCP transitory connections. Defaults to 30s if not set.
  *   `udpIdleTimeoutSec` (*type:* `integer()`, *default:* `nil`) - Timeout (in seconds) for UDP connections. Defaults to 30s if not set.
  """

  use GoogleApi.Gax.ModelBase

  @type t :: %__MODULE__{
          :drainNatIps => list(String.t()) | nil,
          :enableEndpointIndependentMapping => boolean() | nil,
          :icmpIdleTimeoutSec => integer() | nil,
          :logConfig => GoogleApi.Compute.V1.Model.RouterNatLogConfig.t() | nil,
          :minPortsPerVm => integer() | nil,
          :name => String.t() | nil,
          :natIpAllocateOption => String.t() | nil,
          :natIps => list(String.t()) | nil,
          :sourceSubnetworkIpRangesToNat => String.t() | nil,
          :subnetworks => list(GoogleApi.Compute.V1.Model.RouterNatSubnetworkToNat.t()) | nil,
          :tcpEstablishedIdleTimeoutSec => integer() | nil,
          :tcpTransitoryIdleTimeoutSec => integer() | nil,
          :udpIdleTimeoutSec => integer() | nil
        }

  field(:drainNatIps, type: :list)
  field(:enableEndpointIndependentMapping)
  field(:icmpIdleTimeoutSec)
  field(:logConfig, as: GoogleApi.Compute.V1.Model.RouterNatLogConfig)
  field(:minPortsPerVm)
  field(:name)
  field(:natIpAllocateOption)
  field(:natIps, type: :list)
  field(:sourceSubnetworkIpRangesToNat)
  field(:subnetworks, as: GoogleApi.Compute.V1.Model.RouterNatSubnetworkToNat, type: :list)
  field(:tcpEstablishedIdleTimeoutSec)
  field(:tcpTransitoryIdleTimeoutSec)
  field(:udpIdleTimeoutSec)
end

defimpl Poison.Decoder, for: GoogleApi.Compute.V1.Model.RouterNat do
  def decode(value, options) do
    GoogleApi.Compute.V1.Model.RouterNat.decode(value, options)
  end
end

defimpl Poison.Encoder, for: GoogleApi.Compute.V1.Model.RouterNat do
  def encode(value, options) do
    GoogleApi.Gax.ModelBase.encode(value, options)
  end
end