# Copyright 2019 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# NOTE: This file is auto generated by the elixir code generator program.
# Do not edit this file manually.
defmodule GoogleApi.Container.V1.Model.ClusterUpdate do
@moduledoc """
ClusterUpdate describes an update to the cluster. Exactly one update can be applied to a cluster with each request, so at most one field can be provided.
## Attributes
* `desiredAddonsConfig` (*type:* `GoogleApi.Container.V1.Model.AddonsConfig.t`, *default:* `nil`) - Configurations for the various addons available to run in the cluster.
* `desiredAuthenticatorGroupsConfig` (*type:* `GoogleApi.Container.V1.Model.AuthenticatorGroupsConfig.t`, *default:* `nil`) - The desired authenticator groups config for the cluster.
* `desiredAutopilot` (*type:* `GoogleApi.Container.V1.Model.Autopilot.t`, *default:* `nil`) - The desired Autopilot configuration for the cluster.
* `desiredBinaryAuthorization` (*type:* `GoogleApi.Container.V1.Model.BinaryAuthorization.t`, *default:* `nil`) - The desired configuration options for the Binary Authorization feature.
* `desiredClusterAutoscaling` (*type:* `GoogleApi.Container.V1.Model.ClusterAutoscaling.t`, *default:* `nil`) - Cluster-level autoscaling configuration.
* `desiredDatabaseEncryption` (*type:* `GoogleApi.Container.V1.Model.DatabaseEncryption.t`, *default:* `nil`) - Configuration of etcd encryption.
* `desiredDatapathProvider` (*type:* `String.t`, *default:* `nil`) - The desired datapath provider for the cluster.
* `desiredDefaultSnatStatus` (*type:* `GoogleApi.Container.V1.Model.DefaultSnatStatus.t`, *default:* `nil`) - The desired status of whether to disable default sNAT for this cluster.
* `desiredImageType` (*type:* `String.t`, *default:* `nil`) - The desired image type for the node pool. NOTE: Set the "desired_node_pool" field as well.
* `desiredIntraNodeVisibilityConfig` (*type:* `GoogleApi.Container.V1.Model.IntraNodeVisibilityConfig.t`, *default:* `nil`) - The desired config of Intra-node visibility.
* `desiredL4ilbSubsettingConfig` (*type:* `GoogleApi.Container.V1.Model.ILBSubsettingConfig.t`, *default:* `nil`) - The desired L4 Internal Load Balancer Subsetting configuration.
* `desiredLocations` (*type:* `list(String.t)`, *default:* `nil`) - The desired list of Google Compute Engine [zones](https://cloud.google.com/compute/docs/zones#available) in which the cluster's nodes should be located. This list must always include the cluster's primary zone. Warning: changing cluster locations will update the locations of all node pools and will result in nodes being added and/or removed.
* `desiredLoggingConfig` (*type:* `GoogleApi.Container.V1.Model.LoggingConfig.t`, *default:* `nil`) - The desired logging configuration.
* `desiredLoggingService` (*type:* `String.t`, *default:* `nil`) - The logging service the cluster should use to write logs. Currently available options: * `logging.googleapis.com/kubernetes` - The Cloud Logging service with a Kubernetes-native resource model * `logging.googleapis.com` - The legacy Cloud Logging service (no longer available as of GKE 1.15). * `none` - no logs will be exported from the cluster. If left as an empty string,`logging.googleapis.com/kubernetes` will be used for GKE 1.14+ or `logging.googleapis.com` for earlier versions.
* `desiredMasterAuthorizedNetworksConfig` (*type:* `GoogleApi.Container.V1.Model.MasterAuthorizedNetworksConfig.t`, *default:* `nil`) - The desired configuration options for master authorized networks feature.
* `desiredMasterVersion` (*type:* `String.t`, *default:* `nil`) - The Kubernetes version to change the master to. Users may specify either explicit versions offered by Kubernetes Engine or version aliases, which have the following behavior: - "latest": picks the highest valid Kubernetes version - "1.X": picks the highest valid patch+gke.N patch in the 1.X version - "1.X.Y": picks the highest valid gke.N patch in the 1.X.Y version - "1.X.Y-gke.N": picks an explicit Kubernetes version - "-": picks the default Kubernetes version
* `desiredMonitoringConfig` (*type:* `GoogleApi.Container.V1.Model.MonitoringConfig.t`, *default:* `nil`) - The desired monitoring configuration.
* `desiredMonitoringService` (*type:* `String.t`, *default:* `nil`) - The monitoring service the cluster should use to write metrics. Currently available options: * "monitoring.googleapis.com/kubernetes" - The Cloud Monitoring service with a Kubernetes-native resource model * `monitoring.googleapis.com` - The legacy Cloud Monitoring service (no longer available as of GKE 1.15). * `none` - No metrics will be exported from the cluster. If left as an empty string,`monitoring.googleapis.com/kubernetes` will be used for GKE 1.14+ or `monitoring.googleapis.com` for earlier versions.
* `desiredNodePoolAutoscaling` (*type:* `GoogleApi.Container.V1.Model.NodePoolAutoscaling.t`, *default:* `nil`) - Autoscaler configuration for the node pool specified in desired_node_pool_id. If there is only one pool in the cluster and desired_node_pool_id is not provided then the change applies to that single node pool.
* `desiredNodePoolId` (*type:* `String.t`, *default:* `nil`) - The node pool to be upgraded. This field is mandatory if "desired_node_version", "desired_image_family" or "desired_node_pool_autoscaling" is specified and there is more than one node pool on the cluster.
* `desiredNodeVersion` (*type:* `String.t`, *default:* `nil`) - The Kubernetes version to change the nodes to (typically an upgrade). Users may specify either explicit versions offered by Kubernetes Engine or version aliases, which have the following behavior: - "latest": picks the highest valid Kubernetes version - "1.X": picks the highest valid patch+gke.N patch in the 1.X version - "1.X.Y": picks the highest valid gke.N patch in the 1.X.Y version - "1.X.Y-gke.N": picks an explicit Kubernetes version - "-": picks the Kubernetes master version
* `desiredNotificationConfig` (*type:* `GoogleApi.Container.V1.Model.NotificationConfig.t`, *default:* `nil`) - The desired notification configuration.
* `desiredPrivateClusterConfig` (*type:* `GoogleApi.Container.V1.Model.PrivateClusterConfig.t`, *default:* `nil`) - The desired private cluster configuration.
* `desiredPrivateIpv6GoogleAccess` (*type:* `String.t`, *default:* `nil`) - The desired state of IPv6 connectivity to Google Services.
* `desiredReleaseChannel` (*type:* `GoogleApi.Container.V1.Model.ReleaseChannel.t`, *default:* `nil`) - The desired release channel configuration.
* `desiredResourceUsageExportConfig` (*type:* `GoogleApi.Container.V1.Model.ResourceUsageExportConfig.t`, *default:* `nil`) - The desired configuration for exporting resource usage.
* `desiredShieldedNodes` (*type:* `GoogleApi.Container.V1.Model.ShieldedNodes.t`, *default:* `nil`) - Configuration for Shielded Nodes.
* `desiredVerticalPodAutoscaling` (*type:* `GoogleApi.Container.V1.Model.VerticalPodAutoscaling.t`, *default:* `nil`) - Cluster-level Vertical Pod Autoscaling configuration.
* `desiredWorkloadIdentityConfig` (*type:* `GoogleApi.Container.V1.Model.WorkloadIdentityConfig.t`, *default:* `nil`) - Configuration for Workload Identity.
"""
use GoogleApi.Gax.ModelBase
@type t :: %__MODULE__{
:desiredAddonsConfig => GoogleApi.Container.V1.Model.AddonsConfig.t() | nil,
:desiredAuthenticatorGroupsConfig =>
GoogleApi.Container.V1.Model.AuthenticatorGroupsConfig.t() | nil,
:desiredAutopilot => GoogleApi.Container.V1.Model.Autopilot.t() | nil,
:desiredBinaryAuthorization =>
GoogleApi.Container.V1.Model.BinaryAuthorization.t() | nil,
:desiredClusterAutoscaling => GoogleApi.Container.V1.Model.ClusterAutoscaling.t() | nil,
:desiredDatabaseEncryption => GoogleApi.Container.V1.Model.DatabaseEncryption.t() | nil,
:desiredDatapathProvider => String.t() | nil,
:desiredDefaultSnatStatus => GoogleApi.Container.V1.Model.DefaultSnatStatus.t() | nil,
:desiredImageType => String.t() | nil,
:desiredIntraNodeVisibilityConfig =>
GoogleApi.Container.V1.Model.IntraNodeVisibilityConfig.t() | nil,
:desiredL4ilbSubsettingConfig =>
GoogleApi.Container.V1.Model.ILBSubsettingConfig.t() | nil,
:desiredLocations => list(String.t()) | nil,
:desiredLoggingConfig => GoogleApi.Container.V1.Model.LoggingConfig.t() | nil,
:desiredLoggingService => String.t() | nil,
:desiredMasterAuthorizedNetworksConfig =>
GoogleApi.Container.V1.Model.MasterAuthorizedNetworksConfig.t() | nil,
:desiredMasterVersion => String.t() | nil,
:desiredMonitoringConfig => GoogleApi.Container.V1.Model.MonitoringConfig.t() | nil,
:desiredMonitoringService => String.t() | nil,
:desiredNodePoolAutoscaling =>
GoogleApi.Container.V1.Model.NodePoolAutoscaling.t() | nil,
:desiredNodePoolId => String.t() | nil,
:desiredNodeVersion => String.t() | nil,
:desiredNotificationConfig => GoogleApi.Container.V1.Model.NotificationConfig.t() | nil,
:desiredPrivateClusterConfig =>
GoogleApi.Container.V1.Model.PrivateClusterConfig.t() | nil,
:desiredPrivateIpv6GoogleAccess => String.t() | nil,
:desiredReleaseChannel => GoogleApi.Container.V1.Model.ReleaseChannel.t() | nil,
:desiredResourceUsageExportConfig =>
GoogleApi.Container.V1.Model.ResourceUsageExportConfig.t() | nil,
:desiredShieldedNodes => GoogleApi.Container.V1.Model.ShieldedNodes.t() | nil,
:desiredVerticalPodAutoscaling =>
GoogleApi.Container.V1.Model.VerticalPodAutoscaling.t() | nil,
:desiredWorkloadIdentityConfig =>
GoogleApi.Container.V1.Model.WorkloadIdentityConfig.t() | nil
}
field(:desiredAddonsConfig, as: GoogleApi.Container.V1.Model.AddonsConfig)
field(:desiredAuthenticatorGroupsConfig,
as: GoogleApi.Container.V1.Model.AuthenticatorGroupsConfig
)
field(:desiredAutopilot, as: GoogleApi.Container.V1.Model.Autopilot)
field(:desiredBinaryAuthorization, as: GoogleApi.Container.V1.Model.BinaryAuthorization)
field(:desiredClusterAutoscaling, as: GoogleApi.Container.V1.Model.ClusterAutoscaling)
field(:desiredDatabaseEncryption, as: GoogleApi.Container.V1.Model.DatabaseEncryption)
field(:desiredDatapathProvider)
field(:desiredDefaultSnatStatus, as: GoogleApi.Container.V1.Model.DefaultSnatStatus)
field(:desiredImageType)
field(:desiredIntraNodeVisibilityConfig,
as: GoogleApi.Container.V1.Model.IntraNodeVisibilityConfig
)
field(:desiredL4ilbSubsettingConfig, as: GoogleApi.Container.V1.Model.ILBSubsettingConfig)
field(:desiredLocations, type: :list)
field(:desiredLoggingConfig, as: GoogleApi.Container.V1.Model.LoggingConfig)
field(:desiredLoggingService)
field(:desiredMasterAuthorizedNetworksConfig,
as: GoogleApi.Container.V1.Model.MasterAuthorizedNetworksConfig
)
field(:desiredMasterVersion)
field(:desiredMonitoringConfig, as: GoogleApi.Container.V1.Model.MonitoringConfig)
field(:desiredMonitoringService)
field(:desiredNodePoolAutoscaling, as: GoogleApi.Container.V1.Model.NodePoolAutoscaling)
field(:desiredNodePoolId)
field(:desiredNodeVersion)
field(:desiredNotificationConfig, as: GoogleApi.Container.V1.Model.NotificationConfig)
field(:desiredPrivateClusterConfig, as: GoogleApi.Container.V1.Model.PrivateClusterConfig)
field(:desiredPrivateIpv6GoogleAccess)
field(:desiredReleaseChannel, as: GoogleApi.Container.V1.Model.ReleaseChannel)
field(:desiredResourceUsageExportConfig,
as: GoogleApi.Container.V1.Model.ResourceUsageExportConfig
)
field(:desiredShieldedNodes, as: GoogleApi.Container.V1.Model.ShieldedNodes)
field(:desiredVerticalPodAutoscaling, as: GoogleApi.Container.V1.Model.VerticalPodAutoscaling)
field(:desiredWorkloadIdentityConfig, as: GoogleApi.Container.V1.Model.WorkloadIdentityConfig)
end
defimpl Poison.Decoder, for: GoogleApi.Container.V1.Model.ClusterUpdate do
def decode(value, options) do
GoogleApi.Container.V1.Model.ClusterUpdate.decode(value, options)
end
end
defimpl Poison.Encoder, for: GoogleApi.Container.V1.Model.ClusterUpdate do
def encode(value, options) do
GoogleApi.Gax.ModelBase.encode(value, options)
end
end
