defmodule Membrane.H265.Parser do
@moduledoc """
Membrane element providing parser for H265 encoded video stream.
The parser:
* prepares and sends the appropriate stream format, based on information provided in the stream and via the element's options
* splits the incoming stream into H265 access units - each buffer being output is a `Membrane.Buffer` struct with a
binary payload of a single access unit
* enriches the output buffers with the metadata describing the way the access unit is split into NAL units, type of each NAL unit
making up the access unit and the information if the access unit hold a keyframe.
The parser works in one of three possible modes, depending on the structure of the input buffers:
* `:bytestream` - each input buffer contains some part of H265 stream's payload, but not necessary a logical
H265 unit (like NAL unit or an access unit). Can be used for i.e. for parsing the stream read from the file.
* `:nalu_aligned` - each input buffer contains a single NAL unit's payload
* `:au_aligned` - each input buffer contains a single access unit's payload
The parser's mode is set automatically, based on the input stream format received by that element:
* Receiving `Membrane.RemoteStream` results in the parser mode being set to `:bytestream`
* Receiving `%Membrane.H265{alignment: :nalu}` results in the parser mode being set to `:nalu_aligned`.
* Receiving `%Membrane.H265{alignment: :au}` results in the parser mode being set to `:au_aligned`.
The parser also allows for conversion between stream structures. The available structures are:
* Annex B, `:annexb` - In a stream with this structure each NAL unit is prefixed by three or
four-byte start code (`0x(00)000001`) that allows to identify boundaries between them.
* hvc1, `:hvc1` - In such stream a DCR (Decoder Configuration Record) is included in `stream_format`
and NALUs lack the start codes, but are prefixed with their length. The length of these prefixes
is contained in the stream's DCR. PPSs, SPSs and VPSs (Picture Parameter Sets, Sequence Parameter Sets and Video Parameter Sets)
are transported in the DCR.
* hev1, `:hev1` - The same as hvc1, only that parameter sets may be also present in the stream (in-band).
"""
@behaviour Membrane.H26x.Parser
use Membrane.Filter
require Membrane.H265.NALuTypes, as: NALuTypes
alias Membrane.{H265, RemoteStream}
alias Membrane.H265.{AUSplitter, AUTimestampGenerator, DecoderConfigurationRecord, NALuParser}
@nalu_length_size 4
@metadata_key :h265
def_input_pad :input,
flow_control: :auto,
accepted_format: any_of(RemoteStream, H265)
def_output_pad :output,
flow_control: :auto,
accepted_format:
%H265{alignment: alignment, nalu_in_metadata?: true} when alignment in [:nalu, :au]
def_options vpss: [
spec: [binary()],
default: [],
description: """
Video Parameter Set NAL unit binary payloads - if absent in the stream, may
be provided via this option (only available for `:annexb` output stream format)
Any decoder conforming to the profiles specified in "Annex A" of ITU/IEC H265 (08/21),
but does not support INBLD may discard all VPS NAL units.
"""
],
spss: [
spec: [binary()],
default: [],
description: """
Sequence Parameter Set NAL unit binary payloads - if absent in the stream, should
be provided via this option (only available for `:annexb` output stream format).
"""
],
ppss: [
spec: [binary()],
default: [],
description: """
Picture Parameter Set NAL unit binary payloads - if absent in the stream, should
be provided via this option (only available for `:annexb` output stream format).
"""
],
skip_until_keyframe: [
spec: boolean(),
default: true,
description: """
Determines whether to drop the stream until the first key frame is received.
Defaults to true.
"""
],
repeat_parameter_sets: [
spec: boolean(),
default: false,
description: """
Repeat all parameter sets (`vps`, `sps` and `pps`) on each IRAP picture.
Parameter sets may be retrieved from:
* The stream
* `Parser` options.
* `Decoder Configuration Record`, sent in `:hcv1` and `:hev1` stream types
"""
],
output_alignment: [
spec: :au | :nalu,
default: :au,
description: """
Alignment of the buffers produced as an output of the parser.
If set to `:au`, each output buffer will be a single access unit.
Otherwise, if set to `:nalu`, each output buffer will be a single NAL unit.
"""
],
output_stream_structure: [
spec:
nil
| stream_structure()
| :hvc1
| :hev1,
default: nil,
description: """
format of the outgoing H265 stream, if set to `:annexb` NALUs will be separated by
a start code (0x(00)000001) or if set to `:hvc1` or `:hev1` they will be prefixed by their size.
Additionally for `:hvc1` and `:hev1` a tuple can be passed containing the atom and
`nalu_length_size` that determines the size in bytes of each NALU's field
describing their length (by default 4). In hvc1 output streams the PPSs, SPSs and VPSs will be
transported in the DCR, when in hev1 they will be present only in the stream (in-band).
If not provided or set to nil the stream's structure will remain unchanged.
"""
],
generate_best_effort_timestamps: [
spec:
false
| %{
:framerate => {pos_integer(), pos_integer()},
optional(:add_dts_offset) => boolean()
},
default: false,
description: """
Generates timestamps based on given `framerate`.
This option works only when `Membrane.RemoteStream` format arrives.
Keep in mind that the generated timestamps may be inaccurate and lead
to video getting out of sync with other media, therefore H265 stream
should be kept in a container that stores the timestamps alongside.
By default, the parser adds negative DTS offset to the timestamps,
so that in case of frame reorder (which always happens when B frames
are present) the DTS is always bigger than PTS. If that is not desired,
you can set `add_dts_offset: false`.
The calculated DTS/PTS may be wrong since we base it on access units' POC (Picture Order Count).
We assume here that the POC is continuous on a CVS (Coded Video Sequence) which is
not guaranteed by the H265 specification. An example where POC values may not be continuous is
when generating sub-bitstream from the main stream by deleting access units belonging to a
higher temporal sub-layer.
"""
]
@typedoc """
Format of the H265 stream, if set to `:annexb` NALUs will be separated by
a start code (0x(00)000001) or if set to `:hvc1` or `:hev1` they will be
prefixed by their size.
"""
@type stream_structure ::
:annexb | {codec_tag :: :hvc1 | :hev1, nalu_length_size :: pos_integer()}
@impl true
def handle_init(ctx, opts) do
output_stream_structure =
case opts.output_stream_structure do
:hvc1 -> {:hvc1, @nalu_length_size}
:hev1 -> {:hev1, @nalu_length_size}
stream_structure -> stream_structure
end
initial_parameter_sets = {opts.vpss, opts.spss, opts.ppss}
opts =
Map.from_struct(opts)
|> Map.drop([:vpss, :spss, :ppss])
|> Map.put(:output_stream_structure, output_stream_structure)
|> Map.put(:initial_parameter_sets, initial_parameter_sets)
Membrane.H26x.Parser.handle_init(
ctx,
opts,
__MODULE__,
AUTimestampGenerator,
NALuParser,
AUSplitter,
@metadata_key
)
end
@impl true
def handle_stream_format(:input, stream_format, ctx, state) do
Membrane.H26x.Parser.handle_stream_format(stream_format, ctx, state)
end
@impl true
def handle_buffer(:input, %Membrane.Buffer{} = buffer, ctx, state) do
Membrane.H26x.Parser.handle_buffer(buffer, ctx, state)
end
@impl true
def handle_end_of_stream(:input, ctx, state)
when state.mode != :au_aligned and ctx.pads.input.start_of_stream? do
Membrane.H26x.Parser.handle_end_of_stream(ctx, state)
end
@impl true
def handle_end_of_stream(_pad, _ctx, state) do
{[end_of_stream: :output], state}
end
@impl true
def parse_raw_input_stream_structure(stream_format) do
{alignment, input_raw_stream_structure} =
case stream_format do
%RemoteStream{} ->
{:bytestream, :annexb}
%H265{alignment: alignment, stream_structure: stream_structure} ->
{alignment, stream_structure}
end
case input_raw_stream_structure do
:annexb ->
{alignment, :annexb, {[], [], []}}
{hevc, dcr} ->
%{nalu_length_size: nalu_length_size, vpss: vpss, spss: spss, ppss: ppss} =
DecoderConfigurationRecord.parse(dcr)
{alignment, {hevc, nalu_length_size}, {vpss, spss, ppss}}
end
end
@impl true
def remove_parameter_sets_from_stream?({:hvc1, _nalu_length_size}), do: true
def remove_parameter_sets_from_stream?(_stream_structure), do: false
@impl true
def generate_stream_format(parameter_sets, last_sent_stream_format, state) do
latest_sps = List.last(elem(parameter_sets, 1))
output_raw_stream_structure =
case state.output_stream_structure do
:annexb ->
:annexb
{hevc, _nalu_length_size} ->
{vpss, spss, ppss} = state.cached_parameter_sets
{hevc,
DecoderConfigurationRecord.generate(vpss, spss, ppss, state.output_stream_structure)}
end
case {latest_sps, last_sent_stream_format} do
{nil, nil} ->
nil
{nil, last_sent_stream_format} ->
%{last_sent_stream_format | stream_structure: output_raw_stream_structure}
{latest_sps, _last_sent_stream_format} ->
sps = latest_sps.parsed_fields
%H265{
width: sps.width,
height: sps.height,
profile: sps.profile,
framerate: state.framerate,
alignment: state.output_alignment,
nalu_in_metadata?: true,
stream_structure: output_raw_stream_structure
}
end
end
@impl true
def get_parameter_sets(au) do
Enum.reduce(au, {[], [], []}, fn nalu, {vpss, spss, ppss} ->
case nalu.type do
:vps -> {vpss ++ [nalu], spss, ppss}
:sps -> {vpss, spss ++ [nalu], ppss}
:pps -> {vpss, spss, ppss ++ [nalu]}
_other -> {vpss, spss, ppss}
end
end)
end
@impl true
def keyframe?(au), do: Enum.any?(au, &NALuTypes.is_irap_nalu_type(&1.type))
end