# Changelog
## v1.17.1
This is a security/bug fix patch release. It should be safe to update for
everyone.
* Updated dependencies
* [nerves_system_br v1.17.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.17.1)
* [Buildroot 2021.08.1](http://lists.busybox.net/pipermail/buildroot/2021-October/625642.html)
* [Erlang/OTP 24.1.2](https://erlang.org/download/OTP-24.1.2.README)
* Improvements
* Include software versioning and licensing info (see legal-info directory in
artifact)
## v1.17.0
This release updates to Buildroot 2021.08 and OTP 24.1. If you have made a
custom system off this one, please review the `nerves_system_br v1.17.0` release
notes.
* Updated dependencies
* [nerves_system_br v1.17.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.17.0)
* [Buildroot 2021.08](http://lists.busybox.net/pipermail/buildroot/2021-September/622072.html)
* [Erlang/OTP 24.1](https://erlang.org/download/OTP-24.1.README)
## v1.16.2
This release updates Erlang/OTP from 24.0.3 to 24.0.5 and Buildroot from 2021.05
to 2021.05.1. Both of these are security/bug fix updates. This is expected to be
a safe upgrade from v1.16.1 for all users.
* Updated dependencies
* [nerves_system_br v1.16.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.16.1)
* [Erlang/OTP 24.0.5](https://erlang.org/download/OTP-24.0.5.README)
* Improvements
* Beta support for using a `runtime.exs` script for runtime configuration.
* Added a `provision` task to the `fwup.config` to enable re-provisioning a
MicroSD card without changing its contents.
* Adds a default `/etc/sysctl.conf` that enables use of ICMP in Erlang. This
requires `nerves_runtime v0.11.5` or later to automatically load the sysctl
variables. With it using `:gen_udp` to send/receive ICMP will "just work".
It also makes it easier to add other sysctl variables if needed.
## v1.16.1
This release updates Nerves Toolchains to v1.4.3 and OTP 24.0.3. It should be safe for everyone to apply.
* Updated dependencies
* [nerves_system_br v1.16.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.16.1)
* [Erlang/OTP 24.0.3](https://erlang.org/download/OTP-24.0.3.README)
* [nerves toolchains v1.4.3](https://github.com/nerves-project/toolchains/releases/tag/v1.4.3)
## v1.16.0
This release updates to Buildroot 2021.05 and OTP 24.0.2. If you have made a
custom system off this one, please review the `nerves_system_br v1.16.0` release
notes.
* Updated dependencies
* [nerves_system_br v1.16.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.16.0)
* [Buildroot 2021.05](http://lists.busybox.net/pipermail/buildroot/2021-June/311946.html)
* [Erlang/OTP 24.0.2](https://erlang.org/download/OTP-24.0.2.README)
* Improvements
* This release now contains debug symbols and includes the Build-ID in the
ELF headers. This makes it easier to get stack traces from C programs. As
before, the Nerves tooling strips all symbols from firmware images, so this
won't make programs bigger.
* Enable compile-time `wpa_supplicant` options to support WPA3, mesh
networking, WPS and autoscan.
## v1.15.1
This is a security/bug fix release that updates to Buildroot 2021.02.1 and OTP
23.3.1. It should be safe for everyone to apply.
* Improvements
* espeak has been removed from the default install to trim 13 MB off the root
filesystem
* Updated dependencies
* [nerves_system_br v1.15.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.15.1)
* [Buildroot 2021.02](http://lists.busybox.net/pipermail/buildroot/2021-April/307970.html)
* [Erlang/OTP 23.3.1](https://erlang.org/download/OTP-23.3.1.README)
## v1.15.0
This release updates to Buildroot 2021.02 and OTP 23.2.7. If you have made a
custom system off this one, please review the `nerves_system_br v1.15.0` release
notes.
The Nerves toolchain has also been updated to v1.4.2. This brings in Linux 4.14
headers to enable use of cdev and eBPF. This won't affect most users.
* Updated dependencies
* [nerves_system_br v1.15.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.15.0)
* [Buildroot 2021.02](http://lists.busybox.net/pipermail/buildroot/2021-March/305168.html)
* [Erlang/OTP 23.2.7](https://erlang.org/download/OTP-23.2.7.README)
* [nerves toolchains v1.4.2](https://github.com/nerves-project/toolchains/releases/tag/v1.4.2)
## v1.14.0
This release updates to Buildroot 2020.11.2, GCC 10.2 and OTP 23.2.4.
When migrating custom systems based, please be aware of the following important
changes:
* There's a new `getrandom` syscall that is made early in BEAM startup. This has
the potential to block the BEAM before Nerves can start `rngd` to provide
entropy. We have not seen this issue here, but have updated `erlinit.config`
for the time being as a precaution.
* The GCC 10.2.0 toolchain has a different name that calls out "nerves" as the
vendor and the naming is now more consistent with other toolchain providers.
* Experimental support for tooling that requires more information about the
target has been added. The initial support focuses on zigler.
* Updated dependencies
* [nerves_system_br: bump to v1.14.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.14.4)
* [Buildroot 2020.11.2](http://lists.busybox.net/pipermail/buildroot/2021-January/302574.html)
* [Erlang/OTP 23.2.4](https://erlang.org/download/OTP-23.2.4.README)
* [Nerves toolchains 1.4.1](https://github.com/nerves-project/toolchains/releases/tag/v1.4.1)
## v1.13.3
This is a bug fix release and contains no major changes.
* Updated dependencies
* [nerves_system_br: bump to v1.13.7](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.13.7)
* [Erlang/OTP 23.1.5](https://erlang.org/download/OTP-23.1.5.README)
## v1.13.2
This release includes a patch release update to
[Buildroot 2020.08.2](http://lists.busybox.net/pipermail/buildroot/2020-November/296830.html).
* Updated dependencies
* [nerves_system_br: bump to v1.13.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.13.5)
* [erlinit 1.9.0](https://github.com/nerves-project/erlinit/releases/tag/v1.9.0)
## v1.13.1
The main change in this release is to bump the Linux kernel to 5.4. This follows
the kernel update in the Raspberry Pi OS.
If you have based a custom system off of this one, please inspect the
`nerves_defconfig` for WiFi firmware changes. WiFi firmware is no longer being
pulled from the `rpi-wifi-firmware` since that package is out of date.
* Updated dependencies
* [nerves_system_br: bump to v1.13.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.13.4)
* [Erlang/OTP 23.1.4](https://erlang.org/download/OTP-23.1.4.README)
* [boardid 1.10.0](https://github.com/nerves-project/boardid/releases/tag/v1.10.0)
* Improvements
* Enabled reproducible builds in Buildroot to remove some timestamp and build
path differences in firmware images. This helps delta firmware updates.
* The memory cgroup controller is no longer enabled by default. This was an
upstream change. As a result, the memory cgroup directory is no longer
mounted.
## v1.13.0
This release updates to [Buildroot
2020.08](http://lists.busybox.net/pipermail/buildroot/2020-September/290797.html) and OTP 23.1.1.
* Updated dependencies
* [nerves_system_br: bump to v1.13.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.13.2)
* [Erlang/OTP 23.1.1](https://erlang.org/download/OTP-23.1.1.README)
* [erlinit 1.8.0](https://github.com/nerves-project/erlinit/releases/tag/v1.8.0)
* [nerves 1.7.0](https://github.com/nerves-project/nerves/releases/tag/v1.7.0)
* New features
* Added support for updating the root filesystem using firmware patches.
See the [firmware patch docs](https://hexdocs.pm/nerves/experimental-features.html#content) for more information.
## v1.12.2
This release updates to [Buildroot
2020.05.1](http://lists.busybox.net/pipermail/buildroot/2020-July/287824.html)
and OTP 23.0.3 which are both bug fix releases.
* Updated dependencies
* [nerves_system_br: bump to v1.12.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.12.4)
* [Erlang/OTP 23.0.3](https://erlang.org/download/OTP-23.0.3.README)
* [nerves_heart v0.3.0](https://github.com/nerves-project/nerves_heart/releases/tag/v0.3.0)
* New features
* The `/data` directory now exists for storing application-specific data. It
is currently a symlink to `/root`. Using `/data` will eventually be
encouraged over `/root` even though currently there is no advantage. This
change makes it possible to start migrating paths in applications and
libraries.
* Fixes
* Fixed old references to the `-Os` compiler flag. All C/C++ code will default
to using `-O2` now.
## v1.12.1
* Fixes
* Remove `nerves_system_linter` from hex package. This fixes mix dependency
errors in projects that reference systems with different
`nerves_system_linter` dependency specs.
## v1.12.0
This release updates the system to use Buildroot 2020.05 and Erlang/OTP 23.
Please see the respective release notes for updates and deprecations in both
projects for changes that may affect your application.
* New features
* Support the Raspberry Pi Sense HAT's joystick
* Enable WiFi mesh support in the 802.11 stack
* Updated dependencies
* [nerves_system_br v1.12.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.12.0)
* [Erlang/OTP 23.0.2](https://erlang.org/download/OTP-23.0.2.README)
* [Linux 4.19.118 (Raspberry Pi 1.2020601 tag)](https://github.com/raspberrypi/linux/tree/raspberrypi-kernel_1.20200601-1)
* [Raspberry Pi firmware 1.2020601](https://github.com/raspberrypi/firmware/tree/1.20200601)
## v1.11.2
* Updated dependencies
* [nerves_system_br v1.11.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.11.4)
* Erlang 22.3.4.1
* fwup 1.7.0
## v1.11.1
* Updated dependencies
* [nerves_system_br v1.11.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.11.2)
* Erlang 22.3.1
* erlinit 1.7.0 - tty initialization support
* fwup 1.6.0 - xdelta3/VCDIFF patch support
* Enable unixodbc so that Erlang's odbc application can be used in projects
## v1.11.0
This release updates Buildroot to 2020.02 and upgrades gcc from 8.3 to 9.2.
While this is a minor version bump due to the Buildroot release update, barring
advanced usage of Nerves, this is a straightforward update from v1.10.2.
* Updated dependencies
* [nerves_system_br v1.11.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.11.0)
* linux 4.19.97 (raspberrypi-kernel_1.20200212-1 tag)
* Erlang 22.2.8
## v1.10.2
* Updated dependencies
* [nerves_system_br v1.10.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.10.2)
* Erlang 22.2.4
## v1.10.1
* Enhancements
* Set `expand=true` on the application data partition. This will only take
effect for users running the complete task, fwup will not expand application
data partitions that exist during upgrade tasks.
* Updated dependencies
* [nerves_system_br v1.10.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.10.1)
* Erlang 22.2.3
## v1.10.0
This release updates Buildroot to 2019.11 with security and bug fix updates
across Linux packages. Enables dnsd, udhcpd and ifconfig in the default
Busybox configuration to support `vintage_net` and `vintage_net_wizard`.
See the `nerves_system_br` notes for details.
* Updated dependencies
* [nerves_system_br v1.10.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.10.0)
* Erlang 22.1.8
## v1.9.2
This release updates Buildroot to 2019.08.2 with security and bug fix updates
across Linux packages. See the `nerves_system_br` notes for details.
Erlang/OTP is now at 22.1.7.
* Updated dependencies
* [nerves_system_br v1.9.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.9.5)
## v1.9.1
This release pulls in security and bug fix updates from `nerves_system_br`.
Erlang/OTP is now at 22.1.1.
* Updated dependencies
* [nerves_system_br v1.9.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.9.4)
* linux - update to the raspberrypi-kernel_1.20190925-1 tag
* Enhancements
* The Raspberry Pi Touchscreen drivers are included by default now so that its
possible to use Scenic without any changes to the system.
## v1.9.0
This release updates Buildroot to 2019.08 with security and bug fix updates
across Linux packages. See the `nerves_system_br` notes for details.
* Updated dependencies
* [nerves_system_br v1.9.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.9.2)
* Enhancements
* Support a variety of USB->UART adapters so more devices work out-of-the-box
## v1.8.2
This release fixes an issue that broke display output on small LCD screens.
Updating the Raspberry Pi firmware to the latest from the Raspberry Pi
Foundation fixed the issue. See
https://github.com/fhunleth/rpi_fb_capture/issues/2 for details.
* Updated dependencies
* [nerves_system_br v1.8.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.8.5)
## v1.8.1
* Updated dependencies
* [nerves_system_br v1.8.4](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.8.4)
* Linux 4.19.58 with patches from the Raspberry Pi Foundation
## v1.8.0
This release
This release updates Erlang to OTP 22 and gcc from version 7.3.0 to 8.3.0.
See the nerves_system_br and toolchain release notes for more information.
* Enhancements
* Enable source-based routing in the Linux kernel to support [vintage_net](https://github.com/nerves-networking/vintage_net)
* Updated dependencies
* Erlang 22.0.4
* [nerves_system_br v1.8.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.8.2)
* [nerves_toolchain_arm_unknown_linux_gnueabihf v1.2.0](https://github.com/nerves-project/toolchains/releases/tag/v1.2.0)
## v1.7.2
* Bux fixes
* Add TAR option `--no-same-owner` to fix errors when untarring artifacts as
the root user.
* Updated dependencies
* [nerves_system_br v1.7.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.7.2)
## v1.7.1
* Improvements
* Bump C compiler options to `-O2` from `-Os`. This provides a small, but
measurable performance improvement (500ms at boot in a trivial project
tested on [nerves_system_rpi0](https://github.com/nerves-project/nerves_system_rpi0)).
* Updated dependencies
* [nerves_system_br v1.7.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.7.1)
## v1.7.0
This release bumps the Linux kernel to 4.19.25. This change had an impact on how
the WiFi regulatory database gets loaded into the kernel. Instead of building it
into the kernel as previously done, the kernel loads it on demand. This requires
that all WiFi drivers be built as kernel modules so that the database isn't
loaded before the root filesystem is mounted. If you made a custom system and
see boot errors about not being able to load the regulatory database, this is
the problem.
* Updated dependencies
* [nerves_system_br v1.7.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.7.0)
* Linux 4.19.25 with patches from the Raspberry Pi Foundation
## v1.6.3
* Updated dependencies
* [nerves_system_br v1.6.8](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.6.8)
* Erlang 21.2.6
## v1.6.2
* Updated dependencies
* [nerves_system_br v1.6.6](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.6.6)
* Erlang 21.2.4
* boardid 1.5.3
## v1.6.1
* Updated dependencies
* [nerves_system_br v1.6.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.6.5)
* Erlang 21.2.2
* boardid 1.5.2
* erlinit 1.4.9
* OpenSSL 1.1.1a
* Linux 4.14.89 with patches from the Raspberry Pi Foundation
* Enhancements
* Moved boardid config from inside erlinit.config to /etc/boardid.config
* Compile gpiomem into the Linux kernel
* Enable pstore, an in-memory buffer that can capture logs, kernel
oops and other information when unexpected reboots. The buffer can be
recovered on the next boot where it can be inspected.
## v1.6.0
This pulls in a pending patch in Buildroot to update the version of
OpenSSL from 1.0.2 to 1.1.0h. This fixes what appears to be issues with
Erlang using OpenSSL engines. It also enables Erlang crypto algorithms
such as ed25519 that have been added in recent Erlang releases.
* Updated dependencies
* [nerves_system_br v1.6.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.6.1)
* Erlang 21.2
* Added dependencies
* wpa_passphrase
* libp11 0.4.9
## v1.5.1
* Updated dependencies
* [nerves_system_br v1.5.3](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.5.3)
## v1.5.0
This release updates the Linux kernel from 4.4 to 4.14.71.
* Enhancements
* Added Alsa utils `aplay` and `amixer` for audio support.
* Added `espeak` a speech synthesizer for text to audio.
* Automatically reboot if the Linux kernel panics (defaults to a 10 second
delay before the reboot)
* Updated dependencies
* [nerves_system_br v1.5.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.5.2)
* Linux 4.14.71 with patches from the Raspberry Pi Foundation
* Erlang 21.0.9
## v1.4.0
This release contains various updates to provisioning variables and data.
**Host requirements**
Building firmware using this system requires `fwup` to be updated on your
host computer to at least `v1.2.5`. The target minimum version requirement
has not changed from `0.15.0`.
**Serial numbers**
Device serial numbers are now set using `NERVES_SERIAL_NUMBER` instead of
`SERIAL_NUMBER`. This is to reduce ambiguity on the source of the serial
by name spacing it along side other Nerves variables. The U-Boot environment
key has also changed from `serial_number` to `nerves_serial_number`. The
erlinit.config has been updated to provide backwards compatibility for setting
the hostname from the serial number by checking for `nerves_serial_number`
and falling back to `serial_number`.
**Custom provisioning**
Provisioning data is applied at the time of calling the `fwup` task `complete`.
The `complete` task is executed when writing the firmware to the target disk.
During this time, `fwup` will include the contents of a provisioning file
located at `${NERVES_SYSTEM}/images/fwup_include/provisioning.conf`. By default,
this file only sets `nerves_serial_number`. You can add additional provisioning
data by overriding the location of this file to include your own by setting
the environment variable `NERVES_PROVISIONING`. If you override this variable
you will be responsible for also setting `nerves_serial_number`.
* Updated dependencies
* [nerves_system_br v1.4.5](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.4.5)
## v1.3.0
This release upgrades gcc from version 6.3.0 to 7.3.0. See the toolchain release
notes for more information.
* Updated dependencies
* [nerves_system_br v1.4.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.4.1)
* [nerves_toolchain_arm_unknown_linux_gnueabihf v1.1.0](https://github.com/nerves-project/toolchains/releases/tag/v1.1.0)
## v1.2.1
* Updated dependencies
* [nerves_system_br v1.3.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.3.2)
* Enhancements
* Enable RTL8188EU driver
## v1.2.0
This release updates Erlang to OTP 21.0
* Updated dependencies
* [nerves_system_br v1.3.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.3.0)
## v1.1.1
This release fixes some issues and adds firmware UUID support. This support can
be used to unambiguously know what's running on a device.
* Updated dependencies
* [nerves_system_br v1.2.2](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.2.2)
* Bug fixes
* Empty serial numbers stored in the U-Boot environment would be used instead
of reverting to devices IDs built into the CPU or board.
* It wasn't possible to enable QtWebEngine (needed for kiosk apps)
## v1.1.0
This release adds official support for provisioning serial numbers to devices.
Other information can be provisioned in a similar manner. See the README.md for
details.
Buildroot was also updated to 2018.05. Be sure to review the `nerves_system_br`
link for the changes in the embedded Linux components.
* Updated dependencies
* [nerves_system_br v1.2.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.2.0)
* New features
* More `wpa-supplicant` features were enabled to support more WiFi use-cases
## v1.0.0
This release contains updates to Erlang and heart from `nerves_system_br` and
mostly cosmetic changes to synchronize it to the other Raspberry Pi systems. The
trivial `.fw` files are no longer created by CI scripts. If you've forked this
project and are building systems using CI, make sure to update your publish
scripts.
* Updated dependencies
* [nerves_system_br v1.0.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.0.0)
* [nerves_toolchain v1.0.0](https://github.com/nerves-project/toolchains/releases/tag/v1.0.0)
* [nerves v1.0.0](https://github.com/nerves-project/nerves/releases/tag/1.0.0)
## v1.0.0-rc.0
* Updated dependencies
* [nerves_system_br v1.0.0-rc.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v1.0.0-rc.0)
* [nerves_toolchain v1.0.0-rc.0](https://github.com/nerves-project/toolchains/releases/tag/v1.0.0-rc.0)
* [nerves v1.0.0-rc.0](https://github.com/nerves-project/nerves/releases/tag/1.0.0-rc.0)
## v0.20.0
* Updated dependencies
* [nerves_system_br v0.17.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.17.0)
* [nerves_toolchain v0.13.0](https://github.com/nerves-project/toolchains/releases/tag/v0.13.0)
* [nerves v0.9.0](https://github.com/nerves-project/nerves/releases/tag/v0.9.0)
## v0.19.1
* Updated dependencies
* [nerves_system_br v0.16.3](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.16.3)
This fixes the call to otp_build so that it always uses Buildroot's version
the autoconf tools.
## v0.19.0
* Updated dependencies
* [nerves_system_br v0.16.1-2017-11](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.16.1-2017-11)
* Enhancements
* Reboot automatically if Erlang VM exits - This is consistent with other
Nerves systems. See rootfs_overlay/etc/erlinit.config if undesired.
* Start running nerves_system_linter to check for configuration errors.
* Disable console blanking for HDMI to make it easier to capture error messages.
* Automount the boot partition readonly at `/boot`
* Support for reverting firmware.
See [Reverting Firmware](https://hexdocs.pm/nerves_runtime/readme.html#reverting-firmware) for more info on reverting firmware.
See [fwup-revert.conf](https://github.com/nerves-project/nerves_system_rpi/blob/master/fwup-revert.conf) for more information on how fwup handles reverting.
## v0.18.0
* Updated dependencies
* [nerves_system_br v0.15.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.15.0)
* [toolchain v0.12.1](https://github.com/nerves-project/toolchains/releases/tag/v0.12.1)
* Enhancements
* Support for nerves 0.8. Moves nerves.exs into mix.exs
## v0.17.1
* Updated dependencies
* [nerves_system_br v0.14.1](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.14.1)
## v0.17.0
* Updated dependencies
* [nerves_system_br v0.14.0](https://github.com/nerves-project/nerves_system_br/releases/tag/v0.14.0)
* [Buildroot 2017.08](https://git.busybox.net/buildroot/plain/CHANGES?id=2017.08)
* [fwup 0.17.0](https://github.com/fhunleth/fwup/releases/tag/v0.17.0)
* [erlinit 1.2.0](https://github.com/nerves-project/erlinit/releases/tag/v1.2.0)
* [nbtty 0.3.0](https://github.com/fhunleth/nbtty/releases/tag/v0.3.0)
* Enhancements
* Add global patch directory
This is required to pull in the e2fsprogs patch that's needed now that
util-linux's uuid_generate function calls getrandom and can block
indefinitely for the urandom pool to initialize
## v0.16.1
* Updated dependencies
* nerves_system_br v0.13.7
## v0.16.0
This release contains an updated toolchain with Linux 4.1 Headers.
You will have to clean and compile any c/c++ code in your project and
dependencies. Failure to do so will result in an error when producing firmware.
* nerves_system_br v0.13.5
* fwup 0.15.4
* Nerves toolchain v0.11.0
## v0.15.0
* nerves_system_br v0.13.3
* erlinit 1.1.4
* New features
* Firmware updates verify that they're updating the right target. If the target
doesn't say that it's an `rpi2` through the firmware metadata, the update
will fail.
* Added meta-misc and meta-vcs-identifier to the `fwup.conf` metadata for use
by users and for the regression test framework
* Use String.trim instead of String.strip to silence Elixir 1.5 warnings
## v0.14.0
* nerves_system_br v0.13.2
* OTP 20
* erlinit 1.1.3
* fwup 0.15.3
## v0.13.0
* nerves_system_br v0.12.1
* erlinit 1.1.1
* fwup 0.15.0
* New features
* The application data partition is now `ext4`. This greatly improves its
robustness to corruption. Nerves.Runtime contains code to initialize it on
first boot.
* Firmware images now contain metadata that can be queried at runtime (see
Nerves.Runtime.KV
* Increased GPU memory to support Pi Camera V2
## v0.12.1
* New features
* 8192cu driver is enabled. This aligns this system with nerves_system_rpi
in terms of WiFi support.
## v0.12.0
* nerves_system_br v0.10.0
* Buildroot 2017.02
* Erlang/OTP 19.3
* New features
* Upgraded the Linux kernel from 4.4.43 -> 4.4.50. Due to the coupling
between the Linux kernel and rpi-firmware and possibly rpi-userland, if
you have a custom system based off this, you should update your Linux
kernel as well. (see `nerves_defconfig`)
## v0.11.0
* New features
* Enabled USB_SERIAL and FTDI_SIO support. Needed for connecting with Arduino to the USB ports
* Support for Nerves 0.5.0
## v0.10.0
* New features
* Upgraded the Linux kernel to 4.4.43. This also removes the
call to mkknlimg which is no longer needed.
* Bump toolchain to use gcc 5.3 (previously using gcc 4.9.3)
## v0.9.0
This version switches to using the `nerves_package` compiler. This will
consolidate overall deps and compilers.
* Nerves.System.BR v0.8.1
* Support for distillery
* Support for nerves_package compiler
## v0.7.0
When upgrading to this version, be sure to review the updates to
nerves_defconfig if you have customized this system.
* nerves_system_br v0.6.2
* Package updates
* Buildroot 2016.08
* Linux 4.4
## v0.6.1
* Package versions
* Nerves.System.BR v0.6.1
* New features
* All Raspberry Pi 2-specific configuration is now in this repository
## v0.6.0
* Nerves.System.BR v0.6.0
* Package updates
* Erlang OTP 19
* Elixir 1.3.1
* fwup 0.8.0
* erlinit 0.7.3
* bborg-overlays (pull in I2C typo fix from upstream)
* Bug fixes
* Synchronize file system kernel configs across all platforms
## v0.5.2
* Enhancements
* Enabled USB Printer kernel mod. Needs to be loaded with `modprobe` to use
* Bug Fixes(raspberry pi)
* Enabled multicast in linux config for rpi/rpi2/rpi3/ev3
## v0.5.1
* Nerves.System.BR v0.5.1
* Bug Fixes(nerves-env)
* Added include paths to CFLAGS and CXXFLAGS
* Pass sysroot to LDFLAGS
## v0.5.0
* Nerves.System.BR v0.5.0
* New features
* WiFi drivers enabled by default on RPi2 and RPi3
* Include wireless regulatory database in Linux kernel by default
on WiFi-enabled platforms. Since kernel/rootfs are read-only and
coupled together for firmware updates, the normal CRDA/udev approach
isn't necessary.
* Upgraded the default BeagleBone Black kernel from 3.8 to 4.4.9. The
standard BBB device tree overlays are included by default even though the
upstream kernel patches no longer include them.
* Change all fwup configurations from two step upgrades to one step
upgrades. If you used the base fwup.conf files to upgrade, you no
longer need to finalize the upgrade. If not, there's no change.
