defmodule Phoenix.PubSub do
@moduledoc """
Realtime Publisher/Subscriber service.
## Getting started
You start Phoenix.PubSub directly in your supervision
tree:
{Phoenix.PubSub, name: :my_pubsub}
You can now use the functions in this module to subscribe
and broadcast messages:
iex> alias Phoenix.PubSub
iex> PubSub.subscribe(:my_pubsub, "user:123")
:ok
iex> Process.info(self(), :messages)
{:messages, []}
iex> PubSub.broadcast(:my_pubsub, "user:123", {:user_update, %{id: 123, name: "Shane"}})
:ok
iex> Process.info(self(), :messages)
{:messages, [{:user_update, %{id: 123, name: "Shane"}}]}
## Adapters
Phoenix PubSub was designed to be flexible and support
multiple backends. There are two officially supported
backends:
* `Phoenix.PubSub.PG2` - the default adapter that ships
as part of Phoenix.PubSub. It uses Distributed Elixir,
directly exchanging notifications between servers.
It supports a `:pool_size` option to be given alongside
the name, defaults to `1`. Note the `:pool_size` must
be the same throughout the cluster, therefore don't
configure the pool size based on `System.schedulers_online/1`,
especially if you are using machines with different specs.
* `Phoenix.PubSub.Redis` - uses Redis to exchange data between
servers. It requires the `:phoenix_pubsub_redis` dependency.
See `Phoenix.PubSub.Adapter` to implement a custom adapter.
## Custom dispatching
Phoenix.PubSub allows developers to perform custom dispatching
by passing a `dispatcher` module which is responsible for local
message deliveries.
The dispatcher must be available on all nodes running the PubSub
system. The `dispatch/3` function of the given module will be
invoked with the subscriptions entries, the broadcaster identifier
(either a pid or `:none`), and the message to broadcast.
You may want to use the dispatcher to perform special delivery for
certain subscriptions. This can be done by passing the :metadata
option during subscriptions. For instance, Phoenix Channels use a
custom `value` to provide "fastlaning", allowing messages broadcast
to thousands or even millions of users to be encoded once and written
directly to sockets instead of being encoded per channel.
"""
@type node_name :: atom | binary
@type t :: atom
@type topic :: binary
@type message :: term
@type dispatcher :: module
defmodule BroadcastError do
defexception [:message]
def exception(msg) do
%BroadcastError{message: "broadcast failed with #{inspect(msg)}"}
end
end
@doc """
Returns a child specification for pubsub with the given `options`.
The `:name` is required as part of `options`. The remaining options
are described below.
## Options
* `:name` - the name of the pubsub to be started
* `:adapter` - the adapter to use (defaults to `Phoenix.PubSub.PG2`)
* `:pool_size` - number of pubsub partitions to launch
(defaults to one partition for every 4 cores)
"""
@spec child_spec(keyword) :: Supervisor.child_spec()
defdelegate child_spec(options), to: Phoenix.PubSub.Supervisor
@doc """
Subscribes the caller to the PubSub adapter's topic.
* `pubsub` - The name of the pubsub system
* `topic` - The topic to subscribe to, for example: `"users:123"`
* `opts` - The optional list of options. See below.
## Duplicate Subscriptions
Callers should only subscribe to a given topic a single time.
Duplicate subscriptions for a Pid/topic pair are allowed and
will cause duplicate events to be sent; however, when using
`Phoenix.PubSub.unsubscribe/2`, all duplicate subscriptions
will be dropped.
## Options
* `:metadata` - provides metadata to be attached to this
subscription. The metadata can be used by custom
dispatching mechanisms. See the "Custom dispatching"
section in the module documentation
"""
@spec subscribe(t, topic, keyword) :: :ok | {:error, term}
def subscribe(pubsub, topic, opts \\ [])
when is_atom(pubsub) and is_binary(topic) and is_list(opts) do
case Registry.register(pubsub, topic, opts[:metadata]) do
{:ok, _} -> :ok
{:error, _} = error -> error
end
end
@doc """
Unsubscribes the caller from the PubSub adapter's topic.
"""
@spec unsubscribe(t, topic) :: :ok
def unsubscribe(pubsub, topic) when is_atom(pubsub) and is_binary(topic) do
Registry.unregister(pubsub, topic)
end
@doc """
Broadcasts message on given topic across the whole cluster.
* `pubsub` - The name of the pubsub system
* `topic` - The topic to broadcast to, ie: `"users:123"`
* `message` - The payload of the broadcast
A custom dispatcher may also be given as a fourth, optional argument.
See the "Custom dispatching" section in the module documentation.
"""
@spec broadcast(t, topic, message, dispatcher) :: :ok | {:error, term}
def broadcast(pubsub, topic, message, dispatcher \\ __MODULE__)
when is_atom(pubsub) and is_binary(topic) and is_atom(dispatcher) do
{:ok, {adapter, name}} = Registry.meta(pubsub, :pubsub)
with :ok <- adapter.broadcast(name, topic, message, dispatcher) do
dispatch(pubsub, :none, topic, message, dispatcher)
end
end
@doc """
Broadcasts message on given topic from the given process across the whole cluster.
* `pubsub` - The name of the pubsub system
* `from` - The pid that will send the message
* `topic` - The topic to broadcast to, ie: `"users:123"`
* `message` - The payload of the broadcast
A custom dispatcher may also be given as a fifth, optional argument.
See the "Custom dispatching" section in the module documentation.
"""
@spec broadcast_from(t, pid, topic, message, dispatcher) :: :ok | {:error, term}
def broadcast_from(pubsub, from, topic, message, dispatcher \\ __MODULE__)
when is_atom(pubsub) and is_pid(from) and is_binary(topic) and is_atom(dispatcher) do
{:ok, {adapter, name}} = Registry.meta(pubsub, :pubsub)
with :ok <- adapter.broadcast(name, topic, message, dispatcher) do
dispatch(pubsub, from, topic, message, dispatcher)
end
end
@doc """
Broadcasts message on given topic only for the current node.
* `pubsub` - The name of the pubsub system
* `topic` - The topic to broadcast to, ie: `"users:123"`
* `message` - The payload of the broadcast
A custom dispatcher may also be given as a fourth, optional argument.
See the "Custom dispatching" section in the module documentation.
"""
@spec local_broadcast(t, topic, message, dispatcher) :: :ok
def local_broadcast(pubsub, topic, message, dispatcher \\ __MODULE__)
when is_atom(pubsub) and is_binary(topic) and is_atom(dispatcher) do
dispatch(pubsub, :none, topic, message, dispatcher)
end
@doc """
Broadcasts message on given topic from a given process only for the current node.
* `pubsub` - The name of the pubsub system
* `from` - The pid that will send the message
* `topic` - The topic to broadcast to, ie: `"users:123"`
* `message` - The payload of the broadcast
A custom dispatcher may also be given as a fifth, optional argument.
See the "Custom dispatching" section in the module documentation.
"""
@spec local_broadcast_from(t, pid, topic, message, dispatcher) :: :ok
def local_broadcast_from(pubsub, from, topic, message, dispatcher \\ __MODULE__)
when is_atom(pubsub) and is_pid(from) and is_binary(topic) and is_atom(dispatcher) do
dispatch(pubsub, from, topic, message, dispatcher)
end
@doc """
Broadcasts message on given topic to a given node.
* `node_name` - The target node name
* `pubsub` - The name of the pubsub system
* `topic` - The topic to broadcast to, ie: `"users:123"`
* `message` - The payload of the broadcast
**DO NOT** use this function if you wish to broadcast to the current
node, as it is always serialized, use `local_broadcast/4` instead.
A custom dispatcher may also be given as a fifth, optional argument.
See the "Custom dispatching" section in the module documentation.
"""
@spec direct_broadcast(t, topic, message, dispatcher) :: :ok | {:error, term}
def direct_broadcast(node_name, pubsub, topic, message, dispatcher \\ __MODULE__)
when is_atom(pubsub) and is_binary(topic) and is_atom(dispatcher) do
{:ok, {adapter, name}} = Registry.meta(pubsub, :pubsub)
adapter.direct_broadcast(name, node_name, topic, message, dispatcher)
end
@doc """
Raising version of `broadcast/4`.
"""
@spec broadcast!(t, topic, message, dispatcher) :: :ok
def broadcast!(pubsub, topic, message, dispatcher \\ __MODULE__) do
case broadcast(pubsub, topic, message, dispatcher) do
:ok -> :ok
{:error, error} -> raise BroadcastError, "broadcast failed: #{inspect(error)}"
end
end
@doc """
Raising version of `broadcast_from/5`.
"""
@spec broadcast_from!(t, pid, topic, message, dispatcher) :: :ok
def broadcast_from!(pubsub, from, topic, message, dispatcher \\ __MODULE__) do
case broadcast_from(pubsub, from, topic, message, dispatcher) do
:ok -> :ok
{:error, error} -> raise BroadcastError, "broadcast failed: #{inspect(error)}"
end
end
@doc """
Raising version of `direct_broadcast/5`.
"""
@spec direct_broadcast!(node_name, t, topic, message, dispatcher) :: :ok
def direct_broadcast!(node_name, pubsub, topic, message, dispatcher \\ __MODULE__) do
case direct_broadcast(node_name, pubsub, topic, message, dispatcher) do
:ok -> :ok
{:error, error} -> raise BroadcastError, "broadcast failed: #{inspect(error)}"
end
end
@doc """
Returns the node name of the PubSub server.
"""
@spec node_name(t) :: node_name
def node_name(pubsub) do
{:ok, {adapter, name}} = Registry.meta(pubsub, :pubsub)
adapter.node_name(name)
end
## Dispatch callback
@doc false
def dispatch(entries, :none, message) do
for {pid, _} <- entries do
send(pid, message)
end
:ok
end
def dispatch(entries, from, message) do
for {pid, _} <- entries, pid != from do
send(pid, message)
end
:ok
end
defp dispatch(pubsub, from, topic, message, dispatcher) do
Registry.dispatch(pubsub, topic, {dispatcher, :dispatch, [from, message]})
:ok
end
end
