# Quixir: Pure Elixir Property-based Testing [](https://travis-ci.org/pragdave/quixir)
[Property-based
testing](http://blog.jessitron.com/2013/04/property-based-testing-what-is-it.html)
is a technique for testing your code by considering general properties
of the functions you write. Rather that using explicit values in your
tests, you instead try to define the types of the values to feed it,
and the properties of the results produced.
For example, given a list, you know that reversing it should produce a
list with the same number of elements. You can specify this in Quixir
like this:
~~~ elixir
ptest some_list: list do
reversed = my_reverse(some_list)
assert length(reversed) == length(some_list)
end
~~~
This says that we're going to run a property test. It will run the
block with a large number of different lists, and inside the block you
can refer to each list as `some_list`. Inside the block, we have
normal ExUnit test code: we produce a reversed copy of the list, then
assert its length is the same as the original.
But what list do we actually pass in? The simple answer is "lots of
them." In this particular case, we'll generate a hundred lists. These
will vary in length, and vary in content, but we guarantee to include
at least one empty list and one list containing a single element (as these
are both common boundary cases that can break code). The overall test
passes if the assertion it contains is true for all these lists.
## What's The Big Deal?
Property-based testing delivers two major benefits.
First, it tests things you might not have considered when writing
tests manually. It can run tens or hundreds of thousands of tests,
using a range of inputs, and verify that the properties you specify
are honored.
Second, and more important, writing property-based tests forces you to
think about the _invariants_ in your code: _what should be true no
matter what I feed this function?_ And invariants are the cornerstone
of all good design. Most likely you use them every day, but they're
often implicit in what you do. Property-based testing surfaces these
invariants—they will drive (and improve) the design of your code.
’nuf hype. Here are the details. But first…
### Alternatives
For a different approach, see
[ExCheck](https://github.com/parroty/excheck), built on
[triq](https://github.com/krestenkrab/triq).
## Installation
~~~ elixir
def deps do
[
...
{ :quixir, "~> 0.1", only: :test },
...
]
end
~~~
## Including in Tests
Quixir tests run inside regular ExUnit tests, and can take advantage
of all the ExUnit features, including tagging, setup, and `describe`
blocks.
Here's a full test file:
~~~ elixir
defmodule TestReverse do
use ExUnit.Case
use Quixir
import MyList, only: [ reverse: 1 ]
test "a reversed list has the same length as the original" do
ptest original: list do
reversed = reverse(original)
assert length(reversed) == length(original)
end
end
test "reversing a list twice returns the original" do
ptest original: list do
new_list = original |> reverse |> reverse
assert new_list == original
end
end
test "reversing a list of length 1 does nothing" do
ptest original: list(length: 1) do
assert reverse(original) == original
end
end
test "reversing a list of length 2 swaps the elements" do
ptest original: list(length: 2) do
[ b, a ] = reverse(original)
assert [ a, b ] == original
end
end
test "reversing a list of length 3 swaps the extremes" do
ptest original: list(length: 3) do
[ c, b, a ] = reverse(original)
assert [ a, b, c ] == original
end
end
end
~~~
## Anatomy of a Property Test
The general form of a property test is
~~~ elixir
ptest [name1: type, name2: type, …], [option,…] do
# code including assertions
# this code can reference the values in name1 and name2
end
~~~
As the `options` are generally omitted, this simplifies to
~~~ elixir
ptest name1: type, name2: type, … do
# code including assertions
end
~~~
### Options
`repeat_for:` _n_
> Number of times to run the block, using different values each time.
Defaults to 100.
`trace: true`
> Dumps the values used in each iteration of the block.
For example:
~~~ elixir
ptest [ a: int, b: int ], trace: true, repeat_for: 50 do
assert a + b == b + a
end
~~~
## Type Specifications
A type specification is the name of a Quixir type generator,
optionally followed by a keyword list of constraints.
* `int`
* `int(min: 20, max: 50)`
* `int(must_have: [ 0, 10, 100 ])`
There's a full list of these generators, their constraints, and their
defaults, [below](#list-of-type-generators).
Sometimes type specifications can be nested. For example, this
specifies (possibly empty) lists of positive integers.
* `list(of: int(min: 1))`
And this is a generator for keyword lists:
* `list(of: tuple(like: { atom, string })`
### Back references to values
Occasionally you want to make the constraints of one type depend on
the value generated for a prior type. You do this using the pin
operator, `^`. For example, the following generates sets of two
integers where the second is guaranteed to be greater the first:
~~~ elixir
ptest a: int, b: int(min: ^a + 1) do
assert a < b
end
~~~
## Examples
(These examples don't show the `test "xxxx" do/end` wrappers.)
~~~ elixir
ptest numbers: list(choose(from: [ int, float ])) do
# numbers will be a randomly sized list containing
# a mixture of ints and floats
end
ptest x: positive_int(y: value(^x * ^x)) do
# x is a random positive integer, and y is the square
# of that integer
end
ptest x: positive_int, y: int(min: ^x+1), z: int(min: ^y+1) do
# x is a random positive integer, y is larger than x,
# and z is larger than y
end
ptest options: map(of: { atom, string}, min: 3, max: 7) do
# options will be a map with between 3 and 7 entries.
# each entry will have an atom as a key and a string
# as a value.
end
ptest options: map(like: %{ name: string, age: int(min:0, max: 130) }) do
# options will be a map with two elements, a name and an age.
# The name will be a string, and the age an integer
# betweem 0 and 130
end
ptest options: list(of: { atom, string}, min: 3, max: 7) do
# options will be a keyword list with between 3 and 7 entries.
end
defmodule Person do
defstruct name: "", age: 0
end
ptest person: struct(Person) do
# person will be instances of struct person. Because the
# default name is a string, the name in this test struct
# will be a random string. Similarly, age will be a random
# integer
end
ptest person: struct(%Person{ name: string(chars: :ascii),
age: int(min: 1, max: 125)) do
# This time, the name will be a random string of 7-bit ascii,
# and the age will be an integer from 1 to 125.
end
~~~
## List of Type Generators
Quixir uses the [Pollution](https://github.com/pragdave/pollution)
library to create the streams of values that are injected into the
tests. These generators are documented [in HexDocs](https://hexdocs.pm/pollution/Pollution.VG.html). Here's a (poorly formatted) version:
<!-- pollution -->
* ### `any()`
Generates a stream of values of any of the types: atom, float, int,
list, map, string, and tuple. Structs are not included, as they require
additional information to create.
If you need finer control over the types and values returned, see
the `choose/2` function.
* ### `atom(options \\ [])`
* ### `bool()`
Return a stream of random booleans (`true` or `false`).
### Example
iex> import Pollution.{Generator, VG}
iex> bool |> as_stream |> Enum.take(5)
[true, false, true, true, false]
* ### `choose(options)`
Each time a value is needed, randomly choose a generator
from the list and invoke it.
### Example
iex> import Pollution.{Generator, VG}
iex> choose(from: [ int(min: 3, max: 7), bool ]) |> as_stream |> Enum.take(5)
[6, false, 4, true, true]
* ### `float(options \\ [])`
Return a stream of random floating point numbers.
### Example
iex> import Pollution.{Generator, VG}
iex> float |> as_stream |> Enum.take(5)
[0.0, -1.0, 1.0, 5.0e-324, -5.0e-324]
### Options
* `min:` _value_
The minimum value that will be generated (default: -1e6).
* `max:` _value_
The maximum value that will be generated (default: 1e6).
* `must_have:` [ _value,_ … ]
Values that _must be_ included in the results. The default is
[ 0.0, -1.0, 1.0, _epsilon_, _-epsilon_ ]
(where _epsilon_ is the smallest expressible float)
Must have values are automatically adjusted to account for the
`min` and `max` values. For example, if you specify `min: 0.5` then
only the 1.0 must-have value will be generated.
### See also
• `positive_float()` • `negative_float` • `non_negative_float`
* ### `int(options \\ [])`
Return a stream of random integers.
### Example
iex> import Pollution.{Generator, VG}
iex> int |> as_stream |> Enum.take(5)
[0, -1, 1, 215, -401]
### Options
* `min:` _value_
The minimum value that will be generated (default: -1000).
* `max:` _value_
The maximum value that will be generated (default: 1000).
* `must_have:` [ _value,_ … ]
Values that _must be_ included in the results. The default is
[ 0, -1, 1 ]
Must have values are automatically adjusted to account for the
`min` and `max` values. For example, if you specify `min: 0` then
only the 0 and 1 must-have values will be generated.
### See also
• `positive_int()` • `negative_int` • `non_negative_int`
* ### `list()`
Return a stream of lists. Each list will have a random length (within limits),
and each element in each list will be randomly chosen from the specified types.
### Example
iex> import Pollution.{Generator, VG}
iex> list(of: bool, max: 7) |> as_stream|> Enum.take(5)
[
[],
[false, false, false],
[false, true, true, false, true],
[false, true, true, true, true, false, true],
[true, true, false, false, false]
]
There are a few special-case constructors:
* `list(length)`
Return lists of the given length
* `list(generator)`
Return lists whose elements are created by _generator_
iex> list(bool) |> as_stream|> Enum.take(5)
Otherwise, pass options:
* `min:` _length_
Minimum length of the lists returned. Default 0
* `max:` _length_
Maximum length of the lists returned. Default 100
* `must_have:` [ _value_, … ]
Values that must be returned. Defaults to returning an empty list
(so the parameter is `must_have: [ [] ]` if the minimum length is
zero, nothing otherwise.
* `of:` _generator_
Specifies the generator used to populate the lists.
### Examples
iex> import Pollution.{Generator, VG}
iex> list(of: int, min: 1, max: 5) |> as_stream |> Enum.take(4)
[[0, -1, 1, -546], [442], [150], [-836, 540, -979]]
iex> list(of: int, min: 1, max: 5) |> as_stream |> Enum.take(4)
[[0], [-1, 1, 984, -206], [-246], [433, 125, -757]]
iex> list(of: choose(from: [value(1), value(2)]), min: 1, max: 5)
...> |> as_stream |> Enum.take(4)
[[2], [1, 1, 2], [2, 2, 1, 1, 1], [2, 2, 1]]
iex> list(of: seq(of: [value(1), value(2)]), min: 1, max: 5)
...> |> as_stream |> Enum.take(4)
[[1, 2], [1, 2, 1, 2], [1], [2, 1]]
* ### `list(size)`
* ### `list(min, max)`
* ### `map(options \\ [])`
Create maps that either mirror a particular structure or that
contain random numbers of elements.
To create a stream of maps with a given structure, use the `like:`
option:
map(like: %{ name: string, age: int(min:0, max: 130) })
In this example, the keys are static atoms—each generated map will
have these two keys. You can also use generators as keys:
map(like: %{ atom: string })
This will generate single element maps, where each element has a
random atom as a key and a random string as a value.
To create a stream of variable size maps, use `of:`, optionally with
the `min:` and `max:` options.
map(of: { atom, string }, min: 3, max: 6)
This will generate a stream of maps of between 3 and 6 elements
each, when each element has an atom as a key and a string as a
value.
You can use generators such as `choose` and `pick_one` to make
things more interesting:
map(of: { atom, choose(from: [string, integer]) }, min: 3, max: 6)
With this example, some elements will have a string value, and some
will have an integer value.
* ### `negative_float()`
Return a stream of floats not greater than -1.0. (Arguably this should
be "not greater than _-epsilon_"). Same as `float(max: -1.0)`
* ### `negative_int()`
Return a stream of integers less than 0. Same as `int(max: -1)`
* ### `nonnegative_float()`
Return a stream of floats greater than or equal to zero.
Same as `float(min: 0.0)`
* ### `nonnegative_int()`
Return a stream of integers greater than or equal to 0.
Same as `int(min: 0)`
* ### `pick_one(options)`
Randomly chooses a generator from the list, and then returns a stream of
values that it produces. This choice is made only once—call `pick_one`
again to get a different result.
### Examples
iex> import Pollution.{Generator, VG}
iex> stream = pick_one(from: [int, bool]) |> as_stream
iex> Enum.take(stream, 5)
[0, -1, 1, -223, 72]
iex> Enum.take(stream, 5)
[0, -1, 1, -553, 847]
iex> Enum.take(stream, 5)
[0, -1, 1, -518, -692]
iex> Enum.take(stream, 5)
[0, -1, 1, 580, 668]
iex> Enum.take(stream, 5)
[0, -1, 1, -989, -353]
iex> stream = pick_one(from: [int, bool]) |> as_stream
iex> Enum.take(stream, 5)
[true, false, false, false, false]
iex> Enum.take(stream, 5)
[false, true, false, false, false]
* ### `positive_float()`
Return a stream of floats not less than 1.0. (Arguably this should
be "not less than _epsilon_"). Same as `float(min: 1.0)`
* ### `positive_int()`
Return a stream of integers not less than 1. Same as `int(min: 1)`
* ### `seq(options)`
Give `seq` a list of generators (using the `of:` option).
It will cycle through these as it streams values.
### Examples
iex> import Pollution.{Generator, VG}
iex> seq(of: [int, bool, float]) |> as_stream |> Enum.take(10)
[0, true, 0.0, -1, true, -1.0, 1, true, 1.0, -702]
* ### `string(options \\ [])`
Return a stream of strings of randomly varying length.
### Examples
iex> import Pollution.{Generator, VG}
iex> string(max: 4) |> as_stream |> Enum.take(5)
["", " ", "墍勧", "㘃牸ྥ姷", ""]
iex> string(chars: :digits, max: 4) |> as_stream |> Enum.take(5)
["33", "", "7", "6223", "55"]
### Options
* `min:` _length_
The minimum length of the returned string (default 0)
* `max:` _length_
The maximum length of the returned string (default 300)
* `chars: :ascii | :digits | :lower | :printable | :upper | :utf`
The set of characters that may be included in the result:
| :ascii | 0..127 |
| :digits | ?0..?9 |
| :lower | ?a..?z |
| :printable | 32..126 |
| :upper | ?A..?Z |
| :utf | 0..0xd7af |
The default is `:utf8`.
* `must_have:` _list_
A list of strings that must be in the result stream. Defaults to `["", "␠"]`,
filtered by the maximum and minimum lengths.
* ### `struct(template)`
Generate a stream of structs. Before starting, the generator reflects
on the struct that is passed in, looking at the types of the values
of each field. It then maps this onto a `map()` generator, using
appropriate subgenerators for each of those fields.
For example, given:
iex> defmodule MyStruct
iex> defstruct an_atom: :a, an_int: 0, other: nil
iex> end
You could call
iex> struct(MyStruct)
As well as passing in the name of a struct, you can pass in
an instance:
iex> struct(%MyStruct{})
In either case, the result would be a stream of MyStructs, as if you
had called
map(like: %{ an_atom: atom,
an_int: int,
other: any,
__struct__: MyStruct)
If you supply generators to the struct you pass in, these will be
used in place of generators for the defaults:
struct(%MyStruct{an_int: int(min: 20), other: string})
* ### `tuple(options \\ [])`
Generate a stream of tuples. The default is to create tuples of varying sizes
with varying content, which is unlikely to be useful. You'll more likely want
to use the `like:` option, which sets a template for the tuples.
### Example
iex> import Pollution.{Generator, VG}
iex> tuple(like: { value("insert"), string(chars: :upper, max: 10)}) |>
...> as_stream |> Enum.take(3)
[{"insert", "M"}, {"insert", "GFOHZNDER"}, {"insert", "FCDO"}]
### Options
* `min:` _size_ • `max:` _size_
Set the minimum and maximum sizes of the returned tuples. The defaults are
0 and 6, but this is overridden by the actual size
if the `like:` option is specified.
* `like:` { _template_ }
A template of generators used to fill the tuple. The generated tuples will
have the same size as the template, and each element wil be generated from
the corresponding generator in the template. For example, a `Keyword`
list could be generated using
iex> list(of: tuple(like: { atom, string(chars: lower, max: 10) })) |> as_stream |> Enum.take(5)
* ### `value(val)`
Generates an infinite stream where each element is its parameter.
### Example
iex> import Pollution.{Generator, VG}
iex> value("nom") |> as_stream |> Enum.take(3)
["nom", "nom", "nom"]
<!-- cleanup -->
## Shrinking
Coming soon…
## Copyright and License
Copyright © 2016 Dave Thomas <dave@pragdave.me>
Licensed under the Apache License, Version 2.0 (the “License”);
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
> http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an _AS IS_ BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
