defmodule Redix do
@moduledoc """
This module provides the main API to interface with Redis.
## Overview
`start_link/2` starts a process that connects to Redis. Each Elixir process
started with this function maps to a client TCP connection to the specified
Redis server.
The architecture is very simple: when you issue commands to Redis (via
`command/3` or `pipeline/3`), the Redix process sends the command to Redis right
away and is immediately able to send new commands. When a response arrives
from Redis, only then the Redix process replies to the caller with the
response. This pattern avoids blocking the Redix process for each request (until
a response arrives), increasing the performance of this driver.
## Reconnections
Redix tries to be as resilient as possible: it tries to recover automatically
from most network errors.
If there's a network error when sending data to Redis or if the connection to Redis
drops, Redix tries to reconnect. The first reconnection attempt will happen
after a fixed time interval; if this attempt fails, reconnections are
attempted until successful, and the time interval between reconnections is
increased exponentially. Some aspects of this behaviour can be configured; see
`start_link/2` and the "Reconnections" page in the docs for more information.
## Sentinel
**Note**: support for Redis Sentinel **is still experimental**. It works, but the API might
change a little bit and the design might be revisited.
Redix supports [Redis Sentinel](https://redis.io/topics/sentinel) by passing a `:sentinel`
option to `start_link/1` (or `start_link/2`) instead of `:host` and `:port`. In `:sentinel`,
you'll specify a list of sentinel nodes to try when connecting and the name of a primary group
(see `start_link/1` for more detailed information on these options). When connecting, Redix will
attempt to connect to each of the specified sentinels in the given order. When it manages to
connect to a sentinel, it will ask that sentinel for the address of the primary for the given
primary group. Then, it will connect to that primary and ask it for confirmation that it is
indeed a primary. If anything in this process doesn't go right, the next sentinel in the list
will be tried.
All of this happens in case of disconnections as well. If there's a disconnection, the whole
process of asking sentinels for a primary is executed again.
You should only care about Redis Sentinel when starting a `Redix` connection: once started,
using the connection will be exactly the same as the non-sentinel scenario.
## Transactions or pipelining?
Pipelining and transactions have things in common but they're fundamentally different.
With a pipeline, you're sending all commands in the pipeline *at once* on the connection
to Redis. This means Redis receives all commands at once, but the Redis server is not
guaranteed to process all those commands at once.
On the other hand, a `MULTI`/`EXEC` transaction guarantees that when `EXEC` is called
all the queued commands in the transaction are executed atomically. However, you don't
need to send all the commands in the transaction at once. If you want to combine
pipelining with `MULTI`/`EXEC` transactions, use `transaction_pipeline/3`.
## Skipping replies
Redis provides commands to control whether you want replies to your commands or not.
These commands are `CLIENT REPLY ON`, `CLIENT REPLY SKIP`, and `CLIENT REPLY OFF`.
When you use `CLIENT REPLY SKIP`, only the command that follows will not get a reply.
When you use `CLIENT REPLY OFF`, all the commands that follow will not get replies until
`CLIENT REPLY ON` is issued. Redix does not support these commands directly because they
would change the whole state of the connection. To skip replies, use `noreply_pipeline/3`
or `noreply_command/3`.
Skipping replies is useful to improve performance when you want to issue many commands
but are not interested in the responses to those commands.
## SSL
Redix supports SSL by passing `ssl: true` in `start_link/1`. You can use the `:socket_opts`
option to pass options that will be used by the SSL socket, like certificates.
If the [CAStore](https://hex.pm/packages/castore) dependency is available, Redix will pick
up its CA certificate store file automatically. You can select a different CA certificate
store by passing in the `:cacertfile` or `:cacerts` socket options. If the server uses a
self-signed certificate, such as for testing purposes, disable certificate verification by
passing `verify: :verify_none` in the socket options.
Some Redis servers, notably Amazon ElastiCache, use wildcard certificates that require
additional socket options for successful verification (requires OTP 21.0 or later):
Redix.start_link(
host: "example.com", port: 9999, ssl: true,
socket_opts: [
customize_hostname_check: [
match_fun: :public_key.pkix_verify_hostname_match_fun(:https)
]
]
)
## Telemetry
Redix uses Telemetry for instrumentation and logging. See `Redix.Telemetry`.
"""
# This module is only a "wrapper" module that exposes the public API alongside
# documentation for it. The real work is done in Redix.Connection and every
# function in this module goes through Redix.Connection.pipeline/3 one way or
# another.
@type command() :: [String.Chars.t()]
@type connection() :: GenServer.server()
@default_timeout 5000
@doc """
Starts a connection to Redis.
This function returns `{:ok, pid}` if the Redix process is started
successfully.
{:ok, pid} = Redix.start_link()
The actual TCP connection to the Redis server may happen either synchronously,
before `start_link/2` returns, or asynchronously. This behaviour is decided by
the `:sync_connect` option (see below).
This function accepts one argument which can either be an string representing
a URI or a keyword list of options.
## Using in supervision trees
Redix supports child specs, so you can use it as part of a supervision tree:
children = [
{Redix, host: "redix.myapp.com", name: :redix}
]
See `child_spec/1` for more information.
## Using a Redis URI
In case `uri_or_opts` is a Redis URI, it must be in the form:
redis://[username:password@]host[:port][/db]
Here are some examples of valid URIs:
* `redis://localhost`
* `redis://:secret@localhost:6397`
* `redis://username:secret@localhost:6397`
* `redis://example.com:6380/1`
The only mandatory thing when using URIs is the host. All other elements are optional
and their default value can be found in the "Options" section below.
In earlier versions of Redix, the username in the URI was ignored. Redis 6 introduced [ACL
support](https://redis.io/topics/acl). Now, Redix supports usernames as well.
## Options
### Redis options
The following options can be used to specify the parameters used to connect to
Redis (instead of a URI as described above):
* `:host` - (string) the host where the Redis server is running. Defaults to
`"localhost"`.
* `:port` - (positive integer) the port on which the Redis server is
running. Defaults to `6379`.
* `:username` - (string) the username to connect to Redis. Defaults to `nil`, meaning no
username is used. Redis supports usernames only since Redis 6 (see the [ACL
documentation](https://redis.io/topics/acl)). If a username is provided (either via
options or via URIs) and the Redis version used doesn't support ACL, then Redix falls
back to using just the password and emits a warning. In future Redix versions, Redix
will raise if a username is passed and the Redis version used doesn't support ACL.
* `:password` - (string or MFA) the password used to connect to Redis. Defaults to
`nil`, meaning no password is used. When this option is provided, all Redix
does is issue an `AUTH` command to Redis in order to authenticate. MFAs are also
supported in the form of `{module, function, arguments}`. This can be used
to fetch the password dynamically on every reconnection but most importantly to
hide the password from crash reports in case the Redix connection crashes for
any reason. For example, you can use `password: {System, :fetch_env!, ["REDIX_PASSWORD"]}`.
* `:database` - (non-negative integer or string) the database to connect to.
Defaults to `nil`, meaning Redix doesn't connect to a specific database (the
default in this case is database `0`). When this option is provided, all Redix
does is issue a `SELECT` command to Redis in order to select the given database.
### Connection options
The following options can be used to tweak how the Redix connection behaves.
* `:socket_opts` - (list of options) this option specifies a list of options
that are passed to the network layer when connecting to the Redis
server. Some socket options (like `:active` or `:binary`) will be
overridden by Redix so that it functions properly.
Defaults to `[]` for TCP and `[verify: :verify_peer, depth: 3]` for SSL.
If the `CAStore` dependency is available, the `cacertfile` option is added
to the SSL options by default as well.
* `:timeout` - (integer) connection timeout (in milliseconds) also directly
passed to the network layer. Defaults to `5000`.
* `:sync_connect` - (boolean) decides whether Redix should initiate the TCP
connection to the Redis server *before* or *after* returning from
`start_link/1`. This option also changes some reconnection semantics; read
the "Reconnections" page in the docs.
* `:exit_on_disconnection` - (boolean) if `true`, the Redix server will exit
if it fails to connect or disconnects from Redis. Note that setting this
option to `true` means that the `:backoff_initial` and `:backoff_max` options
will be ignored. Defaults to `false`.
* `:backoff_initial` - (non-negative integer) the initial backoff time (in milliseconds),
which is the time that the Redix process will wait before
attempting to reconnect to Redis after a disconnection or failed first
connection. See the "Reconnections" page in the docs for more information.
* `:backoff_max` - (positive integer) the maximum length (in milliseconds) of the
time interval used between reconnection attempts. See the "Reconnections"
page in the docs for more information.
* `:name` - Redix is bound to the same registration rules as a `GenServer`. See the
`GenServer` documentation for more information.
* `:ssl` - (boolean) if `true`, connect through SSL, otherwise through TCP. The
`:socket_opts` option applies to both SSL and TCP, so it can be used for things
like certificates. See `:ssl.connect/4`. Defaults to `false`.
* `:sentinel` - (keyword list) options for using
[Redis Sentinel](https://redis.io/topics/sentinel). If this option is provided, then the
`:host` and `:port` option cannot be provided. For the available sentinel options, see the
"Sentinel options" section below.
* `:hibernate_after` - (integer) if present, the Redix connection process awaits any
message for the given number of milliseconds and if no message is received, the process
goes into hibernation automatically (by calling `:proc_lib.hibernate/3`). See
`t::gen_statem.start_opt/0`. Not present by default.
* `:spawn_opt` - (options) if present, its value is passed as options to the
Redix connection process as in `Process.spawn/4`. See `t::gen_statem.start_opt/0`.
Not present by default.
* `:debug` - (options) if present, the corresponding function in the
[`:sys` module](http://www.erlang.org/doc/man/sys.html) is invoked.
Not present by default.
### Sentinel options
The following options can be used to configure the Redis Sentinel behaviour when connecting.
These options should be passed in the `:sentinel` key in the connection options. For more
information on support for Redis sentinel, see the `Redix` module documentation.
* `:sentinels` - (list) a list of sentinel addresses. Each element in this list is the address
of a sentinel to be contacted in order to obtain the address of a primary. The address of
a sentinel can be passed as a Redis URI (see the "Using a Redis URI" section above) or
a keyword list with `:host`, `:port`, `:password` options (same as when connecting to a
Redis instance directly). Note that the password can either be passed in the sentinel
address or globally -- see the `:password` option below. This option is required.
* `:group` - (binary) the name of the group that identifies the primary in the sentinel
configuration. This option is required.
* `:role` - (`:primary` or `:replica`) if `:primary`, the connection will be established
with the primary for the given group. If `:replica`, Redix will ask the sentinel for all
the available replicas for the given group and try to connect to one of them **at random**.
Defaults to `:primary`.
* `:socket_opts` - (list of options) the socket options that will be used when connecting to
the sentinels. Defaults to `[]`.
* `:ssl` - (boolean) if `true`, connect to the sentinels via through SSL, otherwise through
TCP. The `:socket_opts` applies to both TCP and SSL, so it can be used for things like
certificates. See `:ssl.connect/4`. Defaults to `false`.
* `:timeout` - (timeout) the timeout (in milliseconds or `:infinity`) that will be used to
interact with the sentinels. This timeout will be used as the timeout when connecting to
each sentinel and when asking sentinels for a primary. The Redis documentation suggests
to keep this timeout short so that connection to Redis can happen quickly.
* `:password` - (string) if you don't want to specify a password for each sentinel you
list, you can use this option to specify a password that will be used to authenticate
on sentinels if they don't specify a password. This option is recommended over passing
a password for each sentinel because in the future we might do sentinel auto-discovery,
which means authentication can only be done through a global password that works for all
sentinels.
## Examples
iex> Redix.start_link()
{:ok, #PID<...>}
iex> Redix.start_link(host: "example.com", port: 9999, password: "secret")
{:ok, #PID<...>}
iex> Redix.start_link(database: 3, name: :redix_3)
{:ok, #PID<...>}
"""
@spec start_link(binary() | keyword()) :: :gen_statem.start_ret()
def start_link(uri_or_opts \\ [])
def start_link(uri) when is_binary(uri), do: start_link(uri, [])
def start_link(opts) when is_list(opts), do: Redix.Connection.start_link(opts)
@doc """
Starts a connection to Redis.
This is the same as `start_link/1`, but the URI and the options get merged. `other_opts` have
precedence over the things specified in `uri`. Take this code:
Redix.start_link("redis://localhost:6379", port: 6380)
In this example, port `6380` will be used.
"""
@spec start_link(binary(), keyword()) :: :gen_statem.start_ret()
def start_link(uri, other_opts)
def start_link(uri, other_opts) when is_binary(uri) and is_list(other_opts) do
opts = Redix.URI.opts_from_uri(uri)
start_link(Keyword.merge(opts, other_opts))
end
@doc """
Returns a child spec to use Redix in supervision trees.
To use Redix with the default options (same as calling `Redix.start_link()`):
children = [
Redix,
# ...
]
You can pass options:
children = [
{Redix, host: "redix.example.com", name: :redix},
# ...
]
You can also pass a URI:
children = [
{Redix, "redis://redix.example.com:6380"}
]
If you want to pass both a URI and options, you can do it by passing a tuple with the URI as the
first element and the list of options (make sure it has brackets around if using literals) as
the second element:
children = [
{Redix, {"redis://redix.example.com", [name: :redix]}}
]
"""
@spec child_spec(uri | keyword() | {uri, keyword()}) :: Supervisor.child_spec()
when uri: binary()
def child_spec(uri_or_opts)
def child_spec({uri, opts}) when is_binary(uri) and is_list(opts) do
child_spec_with_args([uri, opts])
end
def child_spec(uri_or_opts) when is_binary(uri_or_opts) or is_list(uri_or_opts) do
child_spec_with_args([uri_or_opts])
end
defp child_spec_with_args(args) do
%{
id: __MODULE__,
type: :worker,
start: {__MODULE__, :start_link, args}
}
end
@doc """
Closes the connection to the Redis server.
This function is synchronous and blocks until the given Redix connection frees
all its resources and disconnects from the Redis server. `timeout` can be
passed to limit the amount of time allowed for the connection to exit; if it
doesn't exit in the given interval, this call exits.
## Examples
iex> Redix.stop(conn)
:ok
"""
@spec stop(connection(), timeout()) :: :ok
def stop(conn, timeout \\ :infinity) do
Redix.Connection.stop(conn, timeout)
end
@doc """
Issues a pipeline of commands on the Redis server.
`commands` must be a list of commands, where each command is a list of strings
making up the command and its arguments. The commands will be sent as a single
"block" to Redis, and a list of ordered responses (one for each command) will
be returned.
The return value is `{:ok, results}` if the request is successful, `{:error,
reason}` otherwise.
Note that `{:ok, results}` is returned even if `results` contains one or more
Redis errors (`Redix.Error` structs). This is done to avoid having to walk the
list of results (a `O(n)` operation) to look for errors, leaving the
responsibility to the user. That said, errors other than Redis errors (like
network errors) always cause the return value to be `{:error, reason}`.
If `commands` is an empty list (`[]`) or any of the commands in `commands` is
an empty command (`[]`) then an `ArgumentError` exception is raised right
away.
Pipelining is not the same as a transaction. For more information, see the
module documentation.
## Options
* `:timeout` - (integer or `:infinity`) request timeout (in
milliseconds). Defaults to `#{@default_timeout}`. If the Redis server
doesn't reply within this timeout, `{:error,
%Redix.ConnectionError{reason: :timeout}}` is returned.
## Examples
iex> Redix.pipeline(conn, [["INCR", "mykey"], ["INCR", "mykey"], ["DECR", "mykey"]])
{:ok, [1, 2, 1]}
iex> Redix.pipeline(conn, [["SET", "k", "foo"], ["INCR", "k"], ["GET", "k"]])
{:ok, ["OK", %Redix.Error{message: "ERR value is not an integer or out of range"}, "foo"]}
If Redis goes down (before a reconnection happens):
iex> {:error, error} = Redix.pipeline(conn, [["SET", "mykey", "foo"], ["GET", "mykey"]])
iex> error.reason
:closed
"""
@spec pipeline(connection(), [command()], keyword()) ::
{:ok, [Redix.Protocol.redis_value()]}
| {:error, atom() | Redix.Error.t() | Redix.ConnectionError.t()}
def pipeline(conn, commands, opts \\ []) do
assert_valid_pipeline_commands(commands)
pipeline_without_checks(conn, commands, opts)
end
@doc """
Issues a pipeline of commands to the Redis server, raising if there's an error.
This function works similarly to `pipeline/3`, except:
* if there are no errors in issuing the commands (even if there are one or
more Redis errors in the results), the results are returned directly (not
wrapped in a `{:ok, results}` tuple).
* if there's a connection error then a `Redix.ConnectionError` exception is raised.
For more information on why nothing is raised if there are one or more Redis
errors (`Redix.Error` structs) in the list of results, look at the
documentation for `pipeline/3`.
This function accepts the same options as `pipeline/3`.
## Examples
iex> Redix.pipeline!(conn, [["INCR", "mykey"], ["INCR", "mykey"], ["DECR", "mykey"]])
[1, 2, 1]
iex> Redix.pipeline!(conn, [["SET", "k", "foo"], ["INCR", "k"], ["GET", "k"]])
["OK", %Redix.Error{message: "ERR value is not an integer or out of range"}, "foo"]
If Redis goes down (before a reconnection happens):
iex> Redix.pipeline!(conn, [["SET", "mykey", "foo"], ["GET", "mykey"]])
** (Redix.ConnectionError) :closed
"""
@spec pipeline!(connection(), [command()], keyword()) :: [Redix.Protocol.redis_value()]
def pipeline!(conn, commands, opts \\ []) do
case pipeline(conn, commands, opts) do
{:ok, response} -> response
{:error, error} -> raise error
end
end
@doc """
Issues a pipeline of commands to the Redis server, asking the server to not send responses.
This function is useful when you want to issue commands to the Redis server but you don't
care about the responses. For example, you might want to set a bunch of keys but you don't
care for a confirmation that they were set. In these cases, you can save bandwidth by asking
Redis to not send replies to your commands.
Since no replies are sent back, this function returns `:ok` in case there are no network
errors, or `{:error, reason}` otherwise.any()
This function accepts the same options as `pipeline/3`.
## Examples
iex> commands = [["INCR", "mykey"], ["INCR", "meykey"]]
iex> Redix.noreply_pipeline(conn, commands)
:ok
iex> Redix.command(conn, ["GET", "mykey"])
{:ok, "2"}
"""
@doc since: "0.8.0"
@spec noreply_pipeline(connection(), [command()], keyword()) ::
:ok | {:error, atom() | Redix.Error.t() | Redix.ConnectionError.t()}
def noreply_pipeline(conn, commands, opts \\ []) do
assert_valid_pipeline_commands(commands)
commands = [["CLIENT", "REPLY", "OFF"]] ++ commands ++ [["CLIENT", "REPLY", "ON"]]
# The "OK" response comes from the last "CLIENT REPLY ON".
with {:ok, ["OK"]} <- pipeline_without_checks(conn, commands, opts),
do: :ok
end
@doc """
Same as `noreply_pipeline/3` but raises in case of errors.
"""
@doc since: "0.8.0"
@spec noreply_pipeline!(connection(), [command()], keyword()) :: :ok
def noreply_pipeline!(conn, commands, opts \\ []) do
case noreply_pipeline(conn, commands, opts) do
:ok -> :ok
{:error, error} -> raise error
end
end
@doc """
Issues a command on the Redis server.
This function sends `command` to the Redis server and returns the response
returned by Redis. `pid` must be the pid of a Redix connection. `command` must
be a list of strings making up the Redis command and its arguments.
The return value is `{:ok, response}` if the request is successful and the
response is not a Redis error. `{:error, reason}` is returned in case there's
an error in the request (such as losing the connection to Redis in between the
request). `reason` can also be a `Redix.Error` exception in case Redis is
reachable but returns an error (such as a type error).
If the given command is an empty command (`[]`), an `ArgumentError`
exception is raised.
This function accepts the same options as `pipeline/3`.
## Examples
iex> Redix.command(conn, ["SET", "mykey", "foo"])
{:ok, "OK"}
iex> Redix.command(conn, ["GET", "mykey"])
{:ok, "foo"}
iex> Redix.command(conn, ["INCR", "mykey"])
{:error, "ERR value is not an integer or out of range"}
If Redis goes down (before a reconnection happens):
iex> {:error, error} = Redix.command(conn, ["GET", "mykey"])
iex> error.reason
:closed
"""
@spec command(connection(), command(), keyword()) ::
{:ok, Redix.Protocol.redis_value()}
| {:error, atom() | Redix.Error.t() | Redix.ConnectionError.t()}
def command(conn, command, opts \\ []) do
case pipeline(conn, [command], opts) do
{:ok, [%Redix.Error{} = error]} -> {:error, error}
{:ok, [response]} -> {:ok, response}
{:error, _reason} = error -> error
end
end
@doc """
Issues a command on the Redis server, raising if there's an error.
This function works exactly like `command/3` but:
* if the command is successful, then the result is returned directly (not wrapped in a
`{:ok, result}` tuple).
* if there's a Redis error or a connection error, a `Redix.Error` or `Redix.ConnectionError`
error is raised.
This function accepts the same options as `command/3`.
## Examples
iex> Redix.command!(conn, ["SET", "mykey", "foo"])
"OK"
iex> Redix.command!(conn, ["INCR", "mykey"])
** (Redix.Error) ERR value is not an integer or out of range
If Redis goes down (before a reconnection happens):
iex> Redix.command!(conn, ["GET", "mykey"])
** (Redix.ConnectionError) :closed
"""
@spec command!(connection(), command(), keyword()) :: Redix.Protocol.redis_value()
def command!(conn, command, opts \\ []) do
case command(conn, command, opts) do
{:ok, response} -> response
{:error, error} -> raise error
end
end
@doc """
Same as `command/3` but tells the Redis server to not return a response.
This function is useful when you want to send a command but you don't care about the response.
Since the response is not returned, the return value of this function in case the command
is successfully sent to Redis is `:ok`.
Not receiving a response means saving traffic on the network and memory allocation for the
response. See also `noreply_pipeline/3`.
This function accepts the same options as `pipeline/3`.
## Examples
iex> Redix.noreply_command(conn, ["INCR", "mykey"])
:ok
iex> Redix.command(conn, ["GET", "mykey"])
{:ok, "1"}
"""
@doc since: "0.8.0"
@spec noreply_command(connection(), command(), keyword()) ::
:ok | {:error, atom() | Redix.Error.t() | Redix.ConnectionError.t()}
def noreply_command(conn, command, opts \\ []) do
noreply_pipeline(conn, [command], opts)
end
@doc """
Same as `noreply_command/3` but raises in case of errors.
"""
if Version.match?(System.version(), "~> 1.7"), do: @doc(since: "0.8.0")
@spec noreply_command!(connection(), command(), keyword()) :: :ok
def noreply_command!(conn, command, opts \\ []) do
case noreply_command(conn, command, opts) do
:ok -> :ok
{:error, error} -> raise error
end
end
@doc """
Executes a `MULTI`/`EXEC` transaction.
Redis supports something akin to transactions. It works by sending a `MULTI` command,
then some commands, and then an `EXEC` command. All the commands after `MULTI` are
queued until `EXEC` is issued. When `EXEC` is issued, all the responses to the queued
commands are returned in a list.
This function accepts the same options as `pipeline/3`.
## Examples
To run a `MULTI`/`EXEC` transaction in one go, use this function and pass a list of
commands to use in the transaction:
iex> Redix.transaction_pipeline(conn, [["SET", "mykey", "foo"], ["GET", "mykey"]])
{:ok, ["OK", "foo"]}
## Problems with transactions
There's an inherent problem with Redix's architecture and `MULTI`/`EXEC` transaction.
A Redix process is a single connection to Redis that can be used by many clients. If
a client A sends `MULTI` and client B sends a command before client A sends `EXEC`,
client B's command will be part of the transaction. This is intended behaviour, but
it might not be what you expect. This is why `transaction_pipeline/3` exists: this function
wraps `commands` in `MULTI`/`EXEC` but *sends all in a pipeline*. Since everything
is sent in the pipeline, it's sent at once on the connection and no commands can
end up in the middle of the transaction.
## Running `MULTI`/`EXEC` transactions manually
There are still some cases where you might want to start a transaction with `MULTI`,
then send commands from different processes that you actively want to be in the
transaction, and then send an `EXEC` to run the transaction. It's still fine to do
this with `command/3` or `pipeline/3`, but remember what explained in the section
above. If you do this, do it in an isolated connection (open a new one if necessary)
to avoid mixing things up.
"""
@doc since: "0.8.0"
@spec transaction_pipeline(connection(), [command()], keyword()) ::
{:ok, [Redix.Protocol.redis_value()]}
| {:error, atom() | Redix.Error.t() | Redix.ConnectionError.t()}
def transaction_pipeline(conn, [_ | _] = commands, options \\ []) when is_list(commands) do
with {:ok, responses} <- Redix.pipeline(conn, [["MULTI"]] ++ commands ++ [["EXEC"]], options),
do: {:ok, List.last(responses)}
end
@doc """
Executes a `MULTI`/`EXEC` transaction.
Same as `transaction_pipeline/3`, but returns the result directly instead of wrapping it
in an `{:ok, result}` tuple or raises if there's an error.
This function accepts the same options as `pipeline/3`.
## Examples
iex> Redix.transaction_pipeline!(conn, [["SET", "mykey", "foo"], ["GET", "mykey"]])
["OK", "foo"]
"""
@doc since: "0.8.0"
@spec transaction_pipeline!(connection(), [command()], keyword()) :: [
Redix.Protocol.redis_value()
]
def transaction_pipeline!(conn, commands, options \\ []) do
case transaction_pipeline(conn, commands, options) do
{:ok, response} -> response
{:error, error} -> raise(error)
end
end
defp pipeline_without_checks(conn, commands, opts) do
Redix.Connection.pipeline(conn, commands, opts[:timeout] || @default_timeout)
end
defp assert_valid_pipeline_commands([] = _commands) do
raise ArgumentError, "no commands passed to the pipeline"
end
defp assert_valid_pipeline_commands(commands) when is_list(commands) do
Enum.each(commands, &assert_valid_command/1)
end
defp assert_valid_pipeline_commands(other) do
raise ArgumentError, "expected a list of Redis commands, got: #{inspect(other)}"
end
defp assert_valid_command([]) do
raise ArgumentError, "got an empty command ([]), which is not a valid Redis command"
end
defp assert_valid_command([first, second | _] = command) do
case String.upcase(first) do
first when first in ["SUBSCRIBE", "PSUBSCRIBE", "UNSUBSCRIBE", "PUNSUBSCRIBE"] ->
raise ArgumentError,
"Redix doesn't support Pub/Sub commands; use redix_pubsub " <>
"(https://github.com/whatyouhide/redix_pubsub) for Pub/Sub " <>
"functionality support. Offending command: #{inspect(command)}"
"CLIENT" ->
if String.upcase(second) == "REPLY" do
raise ArgumentError,
"CLIENT REPLY commands are forbidden because of how Redix works internally. " <>
"If you want to issue commands without getting a reply, use noreply_pipeline/2 or noreply_command/2"
end
_other ->
:ok
end
end
defp assert_valid_command(other) when not is_list(other) do
raise ArgumentError,
"expected a list of binaries as each Redis command, got: #{inspect(other)}"
end
defp assert_valid_command(_command) do
:ok
end
end
