# Changelog

## [v0.2.12] - 2021-12-20

### Added

* Property named `"manufacturer"` for the manufacturer name of the modem
* Property named `"model"` for the product name of the modem

## [v0.2.11] - 2021-11-18

### Fixes

- When there is no signal VintageNetQMI would report 1 bar of signal rather than
  0 bars

## [v0.2.10] - 2021-11-17

### Changes

- Power manager timer was petting the watch dog every 60 miliseconds, now it
  will pet the watch dog every 30 seconds.
- Ignore sync indications from QMI so they are not logged.

### Fixes

- A crash that happened when the interface would stop but there was no IP
  address on the interface.
- Internet connectivity checker being enabled when it should not have been

## [v0.2.9] - 2021-09-21

### Added

* Property named `"statistics"` that contains a map of transmit and receive
  stats. The fields are:
  * `:timestamp` - monotonic time for when the stats were last updated
  * `:tx_bytes` - total bytes transmitted
  * `:rx_bytes` - total bytes received
  * `:tx_packets` - total packets transmitted without error
  * `:rx_packets` - total packets received without error
  * `:tx_errors` - total outgoing packets with framing errors
  * `:rx_errors` - total incoming packets with framing errors
  * `:tx_overflows` - total outing packets dropped due to buffer overflows
  * `:rx_overflows` - total incoming packets dropped due to buffer overflows
  * `:tx_drops` - total outgoing packets dropped
  * `:rx_drops` - total incoming packets dropped
* Property `"band"` for the frequency band being used by the radio interface
* Property `"channel"` for the channel being used by the radio interface
* Property `"access_technology"` for the radio interface that is active

## v0.2.8

* Added
  * Location and time properties:
    * `lac` - The Location Area Code (lac) for the current cell
    * `cid` - The Cell ID (cid) for the current cell
    * `network_datetime` - The reported datetime from the network
    * `utc_offset` - The UTC offset in seconds
    * `roaming` - If the network is roaming or not
    * `std_offset` - The standard offset in seconds

## v0.2.7

* Added
  * Support `VintageNet` v0.11.x
  * Serial number properties:
    * `esn` - Electronic Serial Number (ESN)
    * `imei` - International Mobile Equipment Identity (IMEI)
    * `meid` - Mobile Equipment Identifier (MEID)
    * `imeisv_svn` - IMEI software version number
  * The `provider` property to get the service provider name

* Fixes
  * When packet data connection is disconnected set the connection status to
    `:disconnected`
  * Check connectivity status to know if the modem should power cycle

## v0.2.6

* Fixes
  * Fix lease renewal ending in stuck lan connectivity

## v0.2.5

* Updates
  * Support `qmi` v0.6.0

## v0.2.4

* Improvements
  * Support `iccid` property

* Updates
  * Support `qmi` v0.5.1

## v0.2.3

* Fixes
  * `VintageNetQMI.quick_configure/1` updated to use the passed in argument
    for the APN instead of always using hardcoded `"apn"` value

## v0.2.2

* Improvements
  * Add `VintageNetQMI.quick_configure/1` to easily configure `VintageNet` at
    runtime.

* Updates
  * Support `vintage_net` v0.10.2
  * Better handling of connection status

## v0.2.1

* Updates
  * Set connection based on QMI notifications

## v0.2.0

* Updates
  * Change configuration to match VintageNetMobile (backwards incompatible)
  * Don't require IPv4 configuration

## v0.1.3

* Updates
  * Support `qmi` v0.3.1

* Fixes
  * Connection code blocking supervision initialization

## v0.1.2

* Updates
  * Support `qmi` v0.2.0

## v0.1.1

* Updates
  * Support vintage_net v0.10.0

## v0.1.0

Initial Release

[v0.2.12]: https://github.com/nerves-networking/vintage_net_qmi/compare/v0.2.11...v0.2.12
[v0.2.11]: https://github.com/nerves-networking/vintage_net_qmi/compare/v0.2.10...v0.2.11
[v0.2.10]: https://github.com/nerves-networking/vintage_net_qmi/compare/v0.2.9...v0.2.10
[v0.2.9]: https://github.com/nerves-networking/vintage_net_qmi/compare/v0.2.8...v0.2.9