# XMAVLink

This library includes a mix task that generates code from MAVLink XML
definition files and an application that enables communication with other
systems using MAVLink 1 frames and unsigned MAVLink 2 frames over serial,
UDP, and outbound TCP connections.

MAVLink is a Micro Air Vehicle communication protocol used by Pixhawk,
ArduPilot and other leading autopilot platforms. For more information
on MAVLink see https://mavlink.io.

## Installation

XMAVLink currently supports Elixir 1.18 and later on Erlang/OTP 27 and later.
CI tests the pinned repository toolchain in `.tool-versions` and a newer
Elixir/OTP line.

If [available in Hex](https://hex.pm/docs/publish), the package can be installed
by adding `xmavlink` to your list of dependencies in `mix.exs`:

  ```elixir
 def deps do
   [
     {:xmavlink, "~> 0.10.0"}
   ]
 end
 ```

## Current Status

This library is not officially recognised or supported by MAVLink at this
time.

XMAVLink parses and emits MAVLink 1 frames and unsigned MAVLink 2 frames that
do not set incompatible flags. MAVLink 2 signing is not implemented; inbound
MAVLink 2 frames with incompatible flags are discarded. Supported configured
transports are serial, UDP client (`udpout`), UDP server (`udpin`), and TCP
client (`tcpout`). TCP server (`tcpin`) connections are not implemented.

## Generating MAVLink Dialect Modules

MAVLink message definition files for popular dialects can be found [here](https://github.com/mavlink/mavlink/tree/master/message_definitions/v1.0).
To generate an Elixir source file containing the modules we need to speak a MAVLink dialect (for example ardupilotmega):

```
> mix xmavlink test/input/ardupilotmega.xml lib/apm.ex APM
* creating lib/apm.ex
Generated APM in 'lib/apm.ex'.
>
```

The repository includes `lib/common.ex` as checked-in generated output for the
MAVLink Common dialect. Treat generated dialect modules as build artifacts:
change the generator or XML input and regenerate them rather than editing or
formatting generated files by hand.

## Configuring the XMAVLink Application

Add `XMAVLink.Application` with no start arguments to your `mix.exs`. You need to point the application at the dialect you just generated 
and list the connections to other vehicles in `config.exs`:

```
config :xmavlink, dialect: Common, connections: ["serial:/dev/cu.usbserial-A603KH3Y:57600", "udpout:127.0.0.1:14550", "tcpout:127.0.0.1:5760"]
```

The above config specifies the Common dialect we generated and connects to a
vehicle on a radio modem, a UDP peer listening on port 14550, and a SITL vehicle
listening for TCP connections on port 5760. For configured network transports,
`out` means XMAVLink connects or sends to a remote endpoint. `udpin` means
XMAVLink opens a local UDP socket and receives packets from peers. TCP server
mode is not currently supported.

By default the application supervises one router registered as `XMAVLink.Router`.
Set `:router_name` when the application-owned router should use another registered
name:

```elixir
config :xmavlink,
  router_name: MyApp.MAVRouter,
  dialect: Common,
  connections: []
```

### Connection String Formats

XMAVLink supports the following connection string formats:

- **Serial**: `serial:<device_path>:<baud_rate>` (e.g., `"serial:/dev/ttyUSB0:57600"`)
- **UDP Out (client)**: `udpout:<address>:<port>` (e.g., `"udpout:192.168.1.100:14550"`)
- **UDP In (server)**: `udpin:<address>:<port>` (e.g., `"udpin:0.0.0.0:14550"`)
- **TCP Out (client)**: `tcpout:<address>:<port>` (e.g., `"tcpout:192.168.1.100:5760"`)

There is no `tcpin` connection string. TCP is currently supported only as an
outbound client connection, primarily for SITL endpoints.

### Configured Connection Lifecycle

Configured serial, UDP, and TCP connections run under a per-router dynamic
supervisor. Each connection has a worker process that owns its socket or UART
resource, forwards inbound frames to the router, and reconnects after open
failures or TCP/serial disconnects.

By default, connection workers retry every 1000 ms. Override the retry delay
with `:connection_retry_ms`:

```elixir
config :xmavlink,
  dialect: Common,
  connections: ["tcpout:127.0.0.1:5760"],
  connection_retry_ms: 500
```

### DNS Hostname Support

As of version 0.4.2, XMAVLink supports DNS hostnames in addition to IP addresses for network connections. This is particularly useful in:

- **Kubernetes/Docker environments** where services are accessed via DNS names
- **Cloud deployments** where static IPs may not be available
- **Development environments** using service discovery

Examples:

```elixir
config :xmavlink,
  dialect: APM.Dialect,
  connections: [
    # Using DNS hostname
    "udpout:router-service.namespace.svc.cluster.local:14550",
    # Using localhost
    "tcpout:localhost:5760",
    # Traditional IP address (still supported)
    "udpout:192.168.1.100:14551"
  ]
```

The router will automatically resolve DNS hostnames to IP addresses at startup. If a hostname cannot be resolved, the router will raise an `ArgumentError` with details about the resolution failure.

### Heartbeat emission

Most MAVLink nodes (cameras, GCSes, companion computers, autopilots) must emit a `HEARTBEAT` roughly once per second so peers know they're alive. Without it, dynamic / peer-learning routers (including the reference `mavlink-router`) won't forward traffic to them. xmavlink does not emit `HEARTBEAT` by default; opt in via the `:heartbeat` config:

```elixir
config :xmavlink,
  dialect: Common,
  connections: ["udpout:127.0.0.1:14550"],
  heartbeat: [
    interval_ms: 1000,
    message: %Common.Message.Heartbeat{
      type: :mav_type_gcs,
      autopilot: :mav_autopilot_invalid,
      base_mode: MapSet.new(),
      custom_mode: 0,
      system_status: :mav_state_active,
      mavlink_version: 3
    }
  ]
```

For nodes whose heartbeat reflects runtime state (`system_status`, `base_mode`, `custom_mode`), pass a `{module, function, args}` builder instead. The MFA is invoked on every tick to produce a fresh struct:

```elixir
config :xmavlink,
  heartbeat: [
    interval_ms: 1000,
    builder: {MyApp.Mavlink, :build_heartbeat, []}
  ]
```

The first heartbeat is sent immediately so peer-learning routers admit the node within milliseconds of startup. If `:heartbeat` is unset or `nil`, no heartbeats are emitted (backwards-compatible with versions ≤ 0.6.0; consumers that emit their own heartbeats are unaffected).

When multiple local MAVLink identities share one BEAM and one router, use
`:heartbeats` and set an explicit source identity per emitter:

```elixir
config :xmavlink,
  heartbeats: [
    [
      id: :camera_heartbeat,
      source_system: 1,
      source_component: 100,
      interval_ms: 1000,
      builder: {CameraApp.Mavlink, :heartbeat_message, []}
    ],
    [
      id: :gcs_heartbeat,
      source_system: 245,
      source_component: 191,
      interval_ms: 1000,
      builder: {GcsApp.Mavlink, :heartbeat_message, []}
    ]
  ]
```

## Receive MAVLink messages

With the configured MAVLink application running you can subscribe to particular MAVLink messages:

```
alias XMAVLink.Router, as: MAV

defmodule Echo do
  def run() do
    receive do
      msg ->
        IO.inspect msg
    end
    run()
  end
end

MAV.subscribe source_system: 1, message: APM.Message.Heartbeat
Echo.run()
```

or send a MAVLink message:

```
alias XMAVLink.Router, as: MAV
alias Common.Message.RcChannelsOverride

MAV.pack_and_send(
  %RcChannelsOverride{
    target_system: 1,
    target_component: 1,
    chan1_raw: 1500,
    chan2_raw: 1500,
    chan3_raw: 1500,
    chan4_raw: 1500,
    chan5_raw: 1500,
    chan6_raw: 1500,
    chan7_raw: 1500,
    chan8_raw: 1500,
    chan9_raw: 0,
    chan10_raw: 0,
    chan11_raw: 0,
    chan12_raw: 0,
    chan13_raw: 0,
    chan14_raw: 0,
    chan15_raw: 0,
    chan16_raw: 0,
    chan17_raw: 0,
    chan18_raw: 0
  }
)
```

Pass `source_system` and `source_component` when a process needs to emit a
message from an identity other than the router's configured default:

```elixir
MAV.pack_and_send(message, 2, source_system: 245, source_component: 191)
```

## Router Architecture

The XMAVLink application is to Elixir/Erlang code what [MAVProxy](https://ardupilot.org/mavproxy/)
is to its Python modules: a router that sits alongside them and gives them access to other MAVLink
systems over its connections. Unlike MAVProxy it is not responsible for starting/stopping/scheduling
Elixir/Erlang code.

### Router instance model

`XMAVLink.Router` remains the default convenience router name. Applications that
need multiple independent routers can supervise named router instances and pass
the router name or pid as the first argument to the public API:

```elixir
children = [
  {XMAVLink.Router,
   %{
     name: MyApp.VehicleRouter,
     dialect: Common,
     system: 245,
     component: 191,
     connections: ["udpout:127.0.0.1:14550"]
   }}
]

XMAVLink.Router.subscribe(MyApp.VehicleRouter, message: Common.Message.Heartbeat)
XMAVLink.Router.pack_and_send(MyApp.VehicleRouter, message)
XMAVLink.Router.unsubscribe(MyApp.VehicleRouter)
```

Named routers keep separate connection state, route tables, local sequence
numbers, and subscription restart caches. Passing no router target continues to
use the default `XMAVLink.Router` process.

The router is supervised. On a failure the configured connections and previous subscriptions are 
restored immediately. If a connection fails or is not available at startup the router will attempt to
reconnect each second and continue routing frames on the remaining connections. If a subscriber fails
it will be automatically unsubscribed and any new subscriber will be responsible for reconnection.

## Utilities

As of version 0.5.0, XMAVLink includes utility modules (previously in the separate xmavlink_util package) for performing common MAVLink commands and tasks with remote vehicles. These utilities provide:

- **Cache Manager**: Automatically caches received messages and parameters from visible MAV systems
- **Focus Manager**: Manage focus on specific vehicles for streamlined interactive sessions
- **Arm/Disarm**: Simple functions to arm and disarm vehicles
- **Parameter Management**: Request and set vehicle parameters
- **SITL Support**: Forward RC channels for Software-In-The-Loop simulation

The utility layer is opt-in because `CacheManager` subscribes to MAVLink traffic
and requests vehicle parameter lists when vehicles appear. Enable it for the
configured application router with:

```elixir
config :xmavlink,
  utilities: true
```

or supervise it explicitly when using a named router:

```elixir
children = [
  {XMAVLink.Router,
   %{
     name: MyApp.VehicleRouter,
     system: 245,
     component: 250,
     dialect: Common,
     connection_strings: ["udpout:127.0.0.1:14550"]
   }},
  {XMAVLink.Util.Supervisor, router: MyApp.VehicleRouter}
]
```

The current utility API is scoped to one configured router per VM. It uses
global process names and ETS tables for IEx-friendly helpers, so applications
that need multiple independent routers should use the core `XMAVLink.Router`
API directly or keep utility usage limited to one selected router.

Command helpers such as arm/disarm and parameter setting use bounded retry
loops by default. Pass `:retries`, `:retry_interval_ms`, or `:router` in the
options when a helper needs different behavior. Parameter queries return maps
keyed by MAVLink parameter names as strings. `XMAVLink.Util.SITL.forward_rc/2`
also accepts `:destination_address` when the SITL RC input is not on loopback.

## Roadmap

- Signed MAVLink v2 messages

## Source

Copied from [https://github.com/beamuav/elixir-mavlink](https://github.com/beamuav/elixir-mavlink) on 2023-01-01.